Pix and Citrix

[Bwilhelm]

I have a Pix 515e and will access to a Ctrix Server behind the Pix .I open the Port 1494 TCP and 1604 UDP

but a can not browse for Citrix Applications .

[inagaria]

if you are using nfuse or web interface, you will need to open 80 and 443.

for further info

http://support.citrix.com/kb/entry!default.jspa?categoryID=118&entryID=2075&fromSearchPage=true

let me know if that helps.

Thanks,

Iltiaz

[sperez]

This might not be a PIX issue. What version of Citrix are you using is it MF 1.8, MF XP, or MF PS30. Are you using Secure gateway? Do you alternate addressing setup on the citrix server? If so do you have static mappings (in the pix) to those alternate addresses?

This is what is needed:

Citrix servers need alternate addresses.

PIX needs port 1494 and maybe 1604 open inbound via access-list

PIX needs static built to the alternate address

Citrix client needs to use TCP/IP with firewall checkbox set.

Good Luck,

Steve