pix and pdc problem

[diptanshusingh]

hi

i have a problem. i had got some servers on the pix dmz interface. now my pdc is on the inside interface. i want that our servers which r in dmz interface should be able to authenticated with the pdc which is in the dmz . please tell me the solution.

[jackko]

static and inbound acl are required.

e.g.

static (inside,dmz) 1.1.1.1 192.168.1.1 netmask 255.255.255.255

access-list inbound_dmz permit tcp host 1.1.1.1 eq xxx

access-group inbound_dmz in inter dmz

you need to do a research on the actual protocol/port required for ad authentication.

[diptanshusingh]

thanks , but my friend i know this already. i was actually looking for the ad port...any way thanx for ur quick reply. and if any