12-20-2003 05:36 AM - edited 02-20-2020 11:10 PM
Hi,
could any one let me know the way of this --- Am facing a problem with PIX & extreme switch , When i point my Web Server default gateway to my PIX firewall inside ip address ,my browsing and email works fine , but when i point it to the L3 switch of Extreme network then no browsing , no email --- I can say it confirm that Nothing wrong with PIX configuration .... is the way we need to do something in Extreme Switch ...
Thanks
12-20-2003 10:18 AM
Hi,
what is the default gateway of the extreme L3 switch? I think it should be the pix in your setup.
Regards,
Tom
12-20-2003 02:19 PM
Hi,
It seems to me some arp issue. May be PIX is proxy arping for your default gateway as well.
try "sysopt noproxyarp inside"
Thanks
Nadeem
12-20-2003 11:11 PM
My pix inside ip is 10.0.0.11 /16
My L3 extreme Switch is 10.0.100.1 /16
When i point my Web server Default gateway to PIX inside then browsing is fine , email is ok but
when i point my Web server default gateway to L3 switch (which all are in Same VLAN) no internet no email......
I feel there is some comapatibility issue between cisco and Extreme network .... and i need to do something on PIX or L3 switch any suggestions..
12-21-2003 11:02 AM
Hi,
maybe you could enable logging and see what the error messages are.
To enable logging to a syslog server:
logging host inside
logging trap debug
logging on
(ps, free syslog server available at: http://www.kiwisyslog.com/)
I would also like to repeat my previous question:
what is the default gateway of the Extreme Switch?
Kind Regards,
Tom
12-22-2003 04:22 AM
yes the default gateway of Exteme Switch is PIX firewall Inside IP address
12-22-2003 04:50 AM
Hi,
did you try to configure the syslog logging? The logging should tell you what is going wrong.
Regards,
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide