cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

124
Views
0
Helpful
1
Replies
Highlighted
Beginner

PIX PDM and Policy NAT

I am planning on installing the PIX PDM 3.0(2). I read that running the PDM is incompatible with Policy NAT. I have the folloinwg lines in my configuration:

access-list 90 permit ip 192.168.0.0 255.255.255.0 192.168.15.0 255.255.255.0

nat (inside) 0 access-list 90

192.168.0.X is my inside network and 192.168.15.X are the IPs assigned to my VPN users.

Will this part of my configuration be problematic?

If so, is there another way to maintain this functionality?

Thanks to all,

AGS

1 REPLY 1
Highlighted
Beginner

Re: PIX PDM and Policy NAT

I answered my own question!

Upon further reading I see that nat (interface) o [access-list X] is acceptable.

AGS