cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1406
Views
0
Helpful
4
Replies

PIX TFTP

razabhutta
Level 1
Level 1

I tried to copy config of PIX 520 to tftp but got got failed message wilth unknown reason...

wr net tftp:filename

Regards

Raza bhutta

4 Replies 4

rgraether
Level 1
Level 1

If you are running release 6.2 :

wr net tftp-ip

release 6.2 won't accept any filename..

ralph

Thanks for reply I have 6.1

Cisco PIX Firewall Version 6.1(1)

pixa# wr net 202.125.128.210:pixa.cfg

Building configuration...

TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1

Unspecified Error

[FAILED]

Thanks for reply I have 6.1

Cisco PIX Firewall Version 6.1(1)

pixa# wr net 202.125.128.210:pixa.cfg

Building configuration...

TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1

Unspecified Error

[FAILED]

Pls advise.......

I had the same problem with v6.1, until I accidentally figured out that you need a forward-slash in there to make it work:

pixfw# wr net :/filename.txt

Keep in mind that I have specified a defualt TFTP directory in my config, so I didn't need to include an IP address.

Review Cisco Networking for a $25 gift card