06-03-2002 05:24 AM - edited 02-20-2020 10:04 PM
I tried to copy config of PIX 520 to tftp but got got failed message wilth unknown reason...
wr net tftp:filename
Regards
Raza bhutta
06-03-2002 05:29 AM
If you are running release 6.2 :
wr net tftp-ip
release 6.2 won't accept any filename..
ralph
06-03-2002 05:33 AM
Thanks for reply I have 6.1
Cisco PIX Firewall Version 6.1(1)
pixa# wr net 202.125.128.210:pixa.cfg
Building configuration...
TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1
Unspecified Error
[FAILED]
06-03-2002 09:33 PM
Thanks for reply I have 6.1
Cisco PIX Firewall Version 6.1(1)
pixa# wr net 202.125.128.210:pixa.cfg
Building configuration...
TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1
Unspecified Error
[FAILED]
Pls advise.......
06-07-2002 05:48 AM
I had the same problem with v6.1, until I accidentally figured out that you need a forward-slash in there to make it work:
pixfw# wr net :/filename.txt
Keep in mind that I have specified a defualt TFTP directory in my config, so I didn't need to include an IP address.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide