Port fowarding using ASA 5510

[Mohd Khairul Nizam]

Hi all,

eth0/0 = 60.54.x.x

internal server IP = 172.47.1.10

I have a ASA 5510. I want to access the internal server IP through the ASA via http://60.54.x.x:8080/sms/DnNotify ( via port 8080).

How do i configure it? NAT? ACL? configure port?

[gouravbathla]

Hi Nizam

Please confirm following things

Software version you are running on firewall you will get it with "show version".

If you are opening the server from inside LAN which port you are actually using

i.e

http://172.47.1.10/ ??????????

[Mohd Khairul Nizam]

Hi,

ASA version is 8.0(4).

From inside is using port 80

[gouravbathla · Accepted solution]

Hi

1)This is after considering that you have configured the interface.

2)The Server is behind the interface named dmz.

3)The Interface on which connection lands from the internet is named as outside.

access-list outsidein extended permit tcp any host 60.54.x.x eq 8080

access-group outsidein in interface outside

static (dmz,outside) tcp 60.54.x.x 8080  172.47.1.10 80 netmask 255.255.255.255

Rate it if it is helpful !