cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
463
Views
0
Helpful
2
Replies

Problems with PDM PIX ( 506 6.3.(5) )

ramesys12
Level 1
Level 1

Whenever we try to make changes from the PDM it doe snot save changes and simply says that it has taken more than 60 seconds and pelase try again. The connection never drops to the firewall not sure what is wrong here.

Can somone pelase guide us with this problem.

***************************

Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHz

Flash E28F640J3 @ 0x300, 8MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 0016.46c6.cd96, irq 10

1: ethernet1: address is 0016.46c6.cd98, irq 11

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES-AES: Enabled

Maximum Physical Interfaces: 2

Maximum Interfaces: 4

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

This PIX has a Restricted (R) license.

Serial Number: 81234567895 (0x3333f95e1)

Running Activation Key: 123

Configuration has not been modified since last system restart.

JLFW01# sh flash

flash file system: version:3 magic:0x12345679

file 0: origin: 0 length:1978424

file 1: origin: 2097152 length:5049

file 2: origin: 0 length:0

file 3: origin: 2228224 length:3152452

file 4: origin: 0 length:0

file 5: origin: 8257536 length:308

****************************

Upgraded the PDM version to 304

**************************

JLFW01# copy tftp flash:pdm

Address or name of remote host [0.0.0.0]? 10.10.10.2

Source file name [cdisk]? pdm-304.bin

copying tftp://SBS-dc/pdm-304.bin to flash:pdm

[yes|no|again]? yes

Erasing current PDM file

Writing new PDM file

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

PDM file installed.

JLFW01# sh flash

flash file system: version:3 magic:0x12345679

file 0: origin: 0 length:1978424

file 1: origin: 2097152 length:5049

file 2: origin: 0 length:0

file 3: origin: 2228224 length:3152452

file 4: origin: 0 length:0

file 5: origin: 8257536 length:308

JLFW01#

**********************************

2 Replies 2

ramesys12
Level 1
Level 1

Just to add further to this post the message we get is

"PDM did not get a response from the server in the last 60 seconds. Please check to see that the network connections are still up and try to reconnect by refreshing PDM"

Which version of java are you running?

Review Cisco Networking products for a $25 gift card