PRSMv9-SW-5-K9

[peteryouhannafawzy]

i need to know this part number PRSMv9-SW-5-K9 include the software of the prime security and 5 licence to mange 5 firewall ? and don't need any additional licence or anything ?

[Marvin Rhoads]

Peter,

That's for an off-box PRSM that will manage the CX modules (and limited firewall management) on 5 target firewalls.

The individual CX modules still need their respective licenses.

It's a mostly moot point though since both PRSM and CX modules are end of sales since last summer.

http://www.cisco.com/c/en/us/products/collateral/security/asa-5500-series-next-generation-firewalls/eos-eol-notice-c51-733917.html

[peteryouhannafawzy]

now i have  5 ASA5585-S10F10-K9 and i need to add prime security to manage the 5 firewalls on VMWARE which Licence part number should i add ?

[Marvin Rhoads]

The S10F10 model has the FirePOWER module.

Those require FireSIGHT (named FirePOWER as of 6.0) Management Center. The part number to manage 5 devices on a VMware-based virtual platform would be FS-VMW-10-SW-K9 (10 licenses).

The product comes in 2, 10 and 25 unit license tiers. You cannot mix and match or add the smaller ones to make a larger license.

[peteryouhannafawzy]

I don't have fire power service so I don't need firesight , all I need to manage the 5 firewall together from one management interface so I need prime security to manage 5 firewall on vmware what is the part number? Thanks alot

[Marvin Rhoads · Accepted solution]

Peter,

To manage the base ASAs (and not any FirePOWER modules), the "single pane of glass" manager is current Cisco Security Manager (CSM).

http://www.cisco.com/c/en/us/products/security/security-manager/index.html

The part number for a 5-device license is CSMST5-4.9-K9 .

[peteryouhannafawzy]

thanks alot