03-19-2013 10:12 AM - edited 03-11-2019 06:16 PM
Hello
I´m triing to setup a QoS policy on ASA 5515, i read several pages, but my questions are, how setup the real BW?, or is not necessary to do this?
Thanks
Solved! Go to Solution.
03-20-2013 09:37 AM
Hello Victor,
My pleasure,
If you do not have any other question please mark the question as answered so future users can refer to our discussion if they have the same doubts
Regards
03-19-2013 04:16 PM
Hello Victor,
What do you mean by real BW?
03-19-2013 04:25 PM
Thanks for the answer
I mean the Bandwidth, the interface is giga, but i only have 10M with my ISP, so how can i reserve different kind of traffic?
example.
2 Mb for ipsec
2 Mb https
2 Mb http
4 Mb for the rest of the fraffic.
03-19-2013 04:33 PM
Hello Victor,
You will be able to do this via the Modular Policy Framework setup,
Now on your particular requirements you have 2 optios:
-Traffic Policing: Traffic exceeding the policy you configured will be dropped
-Traffic Shapping: Traffic exceeding the policy will be buffered, then it will be delivered as soon as the link can send traffic based on the configuration
Those are your 2 options
Regards,
Julio Carvajal
03-19-2013 08:26 PM
Thanks Julio.
So i have to do a service policy thinking if all the 10M i will use, leaving the last 4M for best effort trafic?
Best Regards
03-19-2013 09:43 PM
You have to configure a service policy,
Creat multiple classes and applied the required bandwith to each of those classes as you want
Regards
03-20-2013 09:25 AM
thanks Julio.
Muchas Gracias
03-20-2013 09:37 AM
Hello Victor,
My pleasure,
If you do not have any other question please mark the question as answered so future users can refer to our discussion if they have the same doubts
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide