routing issue in ASA firewall ( GNS3 topology )

[kuskur.vishwanatha]

Steps away from exam & got struck in routing of asa & router. checked the document. still getting issue.

If enable RIP, I'm able to communicate & nat from out side to inside. But not able to do the same with static routes.

Network object groups,NAT rules & access-lists are in place & works if RIP is configured on Routers & ASA firewall. But not working with below mentioned static routes. Plz help.

[Luke Robertson]

Your ASA does not have static routes for 192.168.1.0 /24 and 192.168.2.0 /24. It will need them to know where to direct 'return' traffic.

Of course, that depends on how your NAT is configured...

[kuskur.vishwanatha]

its in place. Not added in images.

About nat, able to ping from outside to inside if RIP is configured. But not with static routes.

[Luke Robertson]

Maybe include a traceroute and running-config?

[kuskur.vishwanatha]

ok. I"ll check. Using in GNS3. VPCS gives asterisks sometime. so not able to make out.

Thanks for guidance.

[kuskur.vishwanatha]

Mainly concentrating on outside to inside communication. So keeping aside dmz, checked. but now working.

Considering RIP enabled, If inside router is having 192.168.x.x series, & pinging from outside, I can ping till router fa 0/0. not able to reach fa 1/0.

Static route is not at all working.