RPC over HTTP with SSL through PIX Firewall

[eng]

I am running Exchange Server 2003 on a single Windows 2003 server and mail to and from the outside world passes through the PIX 506E properly. I configured RPC over HTTP and set up Certificate Services on the server as per instructions. The mail server is accessible from outside the network with no SSL using http:// but when I turn on SSL and use https:// I get a "Page not found error". RPCPing utility reports "Error 12029 ping failed". Please tell me how to change my config to allow SSL (port 443) traffic through the PIX. My PIX config is attached (mail server outside address is 2XX.XXX.XXX.117 inside address 192.168.0.150).

[MUHAMMAD SALEEM]

I never worked in IOS 6.3(4), but I have 5.1(3), in which we have to define SSL traffic as 443, like in conduit or access-list, what I have found in your config that there is no Fixup Protocol named https, so just replace https with 443 wherever you are using it. then let me know

Saleem

Networks Manager

KFUPM, KSA

[eng]

I made a few additions to the access rules section in the config, but still I get "Page not found" error when using the https:// URL. I'm not very familiar with the software or the commands so I'm having a difficult time trying to figure out what needs to be added or modified in the config. The manual isn't very much help either. The config with my modifications is attached.