08-07-2013 08:10 PM - edited 03-11-2019 07:23 PM
Hello,
If anyone can help me I appreciate it, I'm trying to configure a Cisco asa 5545x in my company but I can not get my LAN internet browsing.
this is the FW configuration, this is my first time
ASA Version 8.6(1)2
!
hostname FwAsa
names
!
interface GigabitEthernet0/0
nameif ExtWan
security-level 0
ip address 181.113.18.90 255.255.255.248
!
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/2
nameif IntWan
security-level 0
ip address 172.16.70.1 255.255.255.248
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/6
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/7
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif Administracion
security-level 0
ip address 172.16.90.2 255.255.255.128
management-only
!
ftp mode passive
dns server-group DefaultDNS
domain-name policianacional.gob.ec
object service http
service tcp source eq www destination eq www
description Navegación
object service https
service tcp source eq https destination eq https
description Navegación Segura
object network Vlan30Dgi
subnet 172.16.30.0 255.255.255.192
object network Vlan40Migracion
subnet 172.16.40.0 255.255.255.192
object network VlanOficinas1
subnet 172.16.10.0 255.255.255.192
object network VlanOficinas2
subnet 172.16.20.0 255.255.255.192
object-group network Estacion
description GroupVlansEstacion
network-object object Vlan30Dgi
network-object object Vlan40Migracion
network-object object VlanOficinas1
network-object object VlanOficinas2
access-list ExtWan_access_in extended permit icmp object-group Estacion 181.113.18.88 255.255.255.248 echo
pager lines 24
mtu Administracion 1500
mtu IntWan 1500
mtu ExtWan 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm history enable
arp timeout 14400
access-group ExtWan_access_in in interface ExtWan
route ExtWan 0.0.0.0 0.0.0.0 181.113.18.89 1
route IntWan 172.16.10.0 255.255.255.192 Swcore 1
route IntWan 172.16.20.0 255.255.255.192 Swcore 1
route IntWan 172.16.30.0 255.255.255.192 Swcore 1
route IntWan 172.16.40.0 255.255.255.192 Swcore 1
route IntWan 172.16.50.0 255.255.255.192 Swcore 1
route IntWan 172.16.80.0 255.255.255.192 Swcore 1
route IntWan 172.16.90.0 255.255.255.192 Swcore 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 172.16.90.0 255.255.255.128 Administracion
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh timeout 5
console timeout 0
!
tls-proxy maximum-session 1000
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly 6
subscribe-to-alert-group configuration periodic monthly 6
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:7cd75958169b216cdd904aabed64abaa
: end
Solved! Go to Solution.
08-07-2013 08:16 PM
Hi,
You dont seem to have any Dynamic PAT configured for your Internal networks outbound access.
Try adding the following configuration
object-group network DEFAULT-PAT-SOURCE
network-object 172.16.10.0 255.255.255.192
network-object 172.16.20.0 255.255.255.192
network-object 172.16.30.0 255.255.255.192
network-object 172.16.40.0 255.255.255.192
network-object 172.16.50.0 255.255.255.192
network-object 172.16.80.0 255.255.255.192
network-object 172.16.90.0 255.255.255.192
nat (IntWan,Extwan) after-auto source dynamic DEFAULT-PAT-SOURCE interface
This should handle NAT for all those networks you have routed towards the link "IntWan"
You could also add the following
policy-map global_policy
class inspection_default
inspect icmp
inspect icmp error
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed.
- Jouni
08-07-2013 08:17 PM
Also,
Change your "IntWan" interfaces "security-level" to "100"
interface GigabitEthernet0/2
security-level 100
- Jouni
08-13-2013 11:27 PM
Hi,
Yes, that should do it.
Though there is a slight typo above with the "object-group" name. Theres a space between the DEFAULT-PAT-SOURCE and 1.
Otherwise its fine.
- Jouni
08-14-2013 09:20 AM
Hi,
Would seem to me that use of ASDM is only allowed from the management interface at the moment.
If you wanted to allow ASDM access from the WAN then you would need to add
http
You would need to specify from which source networks the ASDM can be used.
If you wanted to allow all source networks then the command would be
http 0.0.0.0 0.0.0.0 ExtWan
But if you possible, specify the source networks. If you cant then I would suggest you make sure to configure AAA for the ASDM management connection.
Seems to me that you possibly use the enable password at the moment only.
- Jouni
08-14-2013 11:33 PM
Hi,
Traffic between these 2 interfaces doesnt required NAT configuration atleast so thats fine.
You also seem to have a Global ACL configured
access-list global_access extended permit ip object-group VlansTerminal any
access-list global_access extended permit ip object-group DEFAULT-PAT-SOURCE any
access-list global_access extended permit ip 172.16.60.0 255.255.255.252 any
Though I am not sure what networks "VlansTerminal" contains.
Maybe your source addresses arent included in the above ACL?
Also there might be some routing related problem as I dont know how the routing behind the ASA on the LAN network is handled.
I can't see a problem with the ASA configurations unless the above ACL doesnt contain the source addresses you need.
- Jouni
08-16-2013 12:28 PM
Hi,
Seems to me that you have several public IP addresses available so you could basicly give one public IP address to this host alone with the use of Static NAT
A Static NAT configuration could be configured like this (Use some free public IP address that IS NOT in any use at the moment)
object network SERVER
host 172.16.50.3
nat (IntWan,ExtWan) static
IF you DONT have an ACL attached to the "ExtWan" interface then you can configure this
access-list EXTWAN-IN remark Allow WWW and SSH to the server
access-list EXTWAN-IN permit tcp any object SERVER eq www
access-list EXTWAN-IN permit tcp any object SERVER eq ssh
access-group EXTWAN-IN in interface ExtWan
If you already have an ACL attached to the "ExtWan" then use that ACL name to insert the above rules.
Also, if you dont want to allow traffic from "any" source address then specify the source addresses you need allowed.
- Jouni
08-07-2013 08:16 PM
Hi,
You dont seem to have any Dynamic PAT configured for your Internal networks outbound access.
Try adding the following configuration
object-group network DEFAULT-PAT-SOURCE
network-object 172.16.10.0 255.255.255.192
network-object 172.16.20.0 255.255.255.192
network-object 172.16.30.0 255.255.255.192
network-object 172.16.40.0 255.255.255.192
network-object 172.16.50.0 255.255.255.192
network-object 172.16.80.0 255.255.255.192
network-object 172.16.90.0 255.255.255.192
nat (IntWan,Extwan) after-auto source dynamic DEFAULT-PAT-SOURCE interface
This should handle NAT for all those networks you have routed towards the link "IntWan"
You could also add the following
policy-map global_policy
class inspection_default
inspect icmp
inspect icmp error
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed.
- Jouni
08-07-2013 08:17 PM
Also,
Change your "IntWan" interfaces "security-level" to "100"
interface GigabitEthernet0/2
security-level 100
- Jouni
08-07-2013 08:33 PM
thanks for your quick response Jouni
with these lines and I can navigate from my LAN?
I'll try and tell you
thank you very much
08-07-2013 08:40 PM
Hi,
Well the above configurations seem to me to be some configuration that you need atleast.
I am not sure if it will solve the whole problem yet but I couldnt see anything else wrong with the ASA configuration atleast.
- Jouni
08-13-2013 01:09 PM
if you want a subnet on another interface have internet I create a network object and create a nat rule?
object-group network DEFAULT-PAT-SOURCE 1
network-object 176.16.11.0 255.255.255.192
nat (IntDatos,Extwan) after-auto source dynamic DEFAULT-PAT-SOURCE1 interface
08-13-2013 11:27 PM
Hi,
Yes, that should do it.
Though there is a slight typo above with the "object-group" name. Theres a space between the DEFAULT-PAT-SOURCE and 1.
Otherwise its fine.
- Jouni
08-14-2013 09:07 AM
is ASDM can be accessed from the internet to fw, as it should do?
Thanks for your help has been very useful
08-14-2013 09:20 AM
Hi,
Would seem to me that use of ASDM is only allowed from the management interface at the moment.
If you wanted to allow ASDM access from the WAN then you would need to add
http
You would need to specify from which source networks the ASDM can be used.
If you wanted to allow all source networks then the command would be
http 0.0.0.0 0.0.0.0 ExtWan
But if you possible, specify the source networks. If you cant then I would suggest you make sure to configure AAA for the ASDM management connection.
Seems to me that you possibly use the enable password at the moment only.
- Jouni
08-14-2013 05:48 PM
hello,
you know I've been a big help,
how do I get from one network to another in my firewall settings I have four interfaces on different networks it is impossible to get from one to the other,
interface GigabitEthernet0/0
nameif ExtWan
security-level 0
ip address 1.1.1.1 255.255.255.255.248
!
interface GigabitEthernet0/2
nameif IntWan
security-level 100
ip address 172.16.70.1 255.255.255.248
!
interface GigabitEthernet0/4
nameif IntDatos
security-level 100
ip address 172.16.60.1 255.255.255.252
!
!
interface GigabitEthernet0/6
description extdatosdin
nameif ExtDatos
security-level 100
ip address 172.70.76.233 255.255.255.0
!
clock timezone PEST -5
dns domain-lookup IntWan
dns domain-lookup ExtWan
dns server-group DefaultDNS
name-server 200.107.10.52
name-server 8.8.8.8
same-security-traffic permit intra-interface
subnet 172.16.30.0 255.255.255.192
subnet 172.16.40.0 255.255.255.192
subnet 172.16.10.0 255.255.255.192
subnet 172.16.20.0 255.255.255.192
subnet 176.16.94.0 255.255.255.252
subnet 176.16.41.0 255.255.255.252
subnet 176.16.92.0 255.255.255.252
subnet 176.16.94.0 255.255.255.252
subnet 176.16.93.0 255.255.255.252
subnet 176.16.41.0 255.255.255.224
subnet 176.16.12.0 255.255.255.224
subnet 176.16.13.0 255.255.255.224
subnet 176.16.42.0 255.255.255.224
subnet 176.16.81.0 255.255.255.224
subnet 176.16.84.0 255.255.255.224
subnet 176.16.85.0 255.255.255.224
subnet 176.16.82.0 255.255.255.224
subnet 176.16.83.0 255.255.255.224
subnet 176.16.51.0 255.255.255.224
subnet 176.16.54.0 255.255.255.224
subnet 176.16.52.0 255.255.255.224
subnet 176.16.53.0 255.255.255.224
subnet 176.16.55.0 255.255.255.224
host 172.16.60.2
subnet 192.168.0.0 255.255.255.0
object-group network DEFAULT-PAT-SOURCE
network-object 172.16.10.0 255.255.255.192
network-object 172.16.20.0 255.255.255.192
network-object 172.16.30.0 255.255.255.192
network-object 172.16.40.0 255.255.255.192
object-group network Vlans
network-object 172.16.30.0 255.255.255.192
network-object 172.16.40.0 255.255.255.192
network-object 172.16.10.0 255.255.255.192
network-object 172.16.20.0 255.255.255.192
network-object 176.16.94.0 255.255.255.252
network-object 176.16.41.0 255.255.255.252
network-object 176.16.92.0 255.255.255.252
network-object 176.16.94.0 255.255.255.252
network-object 176.16.93.0 255.255.255.252
network-object 176.16.41.0 255.255.255.224
network-object 176.16.12.0 255.255.255.224
network-object 176.16.13.0 255.255.255.224
network-object 176.16.42.0 255.255.255.224
network-object 176.16.81.0 255.255.255.224
network-object 176.16.84.0 255.255.255.224
network-object 176.16.85.0 255.255.255.224
network-object 176.16.82.0 255.255.255.224
network-object 176.16.83.0 255.255.255.224
network-object 176.16.51.0 255.255.255.224
network-object 176.16.54.0 255.255.255.224
network-object 176.16.52.0 255.255.255.224
network-object 176.16.53.0 255.255.255.224
network-object 176.16.55.0 255.255.255.224
access-list ExtWan_authentication extended permit tcp any any
access-list Global remark Red Datos Matriz
access-list Global standard permit 172.16.60.0 255.255.255.252
access-list Global remark Red datos Dinacipom
access-list Global standard permit 172.70.76.0 255.255.255.0
access-list Global remark Red LAn
access-list Global standard permit 172.16.70.0 255.255.255.248
access-list global_access extended permit ip object-group VlansTerminal any
access-list global_access extended permit ip object-group DEFAULT-PAT-SOURCE any
access-list global_access extended permit ip 172.16.60.0 255.255.255.252 any
pager lines 24
logging enable
logging asdm informational
mtu Administracion 1500
mtu IntWan 1500
mtu ExtWan 1500
mtu IntDatos 1500
mtu ExtDatos 1500
ip verify reverse-path interface ExtWan
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm history enable
arp timeout 14400
!
nat (IntWan,ExtWan) after-auto source dynamic DEFAULT-PAT-SOURCE interface
nat (IntDatos,ExtWan) after-auto source dynamic Vlans interface
access-group global_access global
route ExtWan 0.0.0.0 0.0.0.0 181.113.18.89 1
route IntWan 172.16.10.0 255.255.255.192 Swcore 1
route IntWan 172.16.20.0 255.255.255.192 Swcore 1
route IntWan 172.16.30.0 255.255.255.192 Swcore 1
route IntWan 172.16.40.0 255.255.255.192 Swcore 1
route IntWan 172.16.50.0 255.255.255.192 Swcore 1
route IntWan 172.16.80.0 255.255.255.192 Swcore 1
route IntWan 172.16.90.0 255.255.255.192 Swcore 1
route IntDatos 176.16.0.0 255.255.0.0 172.16.60.2 1
route IntDatos 176.16.11.0 255.255.255.224 172.16.60.2 1
route IntDatos 176.16.53.0 255.255.255.224 172.16.60.2 1
route IntDatos 176.16.83.0 255.255.255.224 172.16.60.2 1
route IntDatos 176.16.93.0 255.255.255.252 172.16.60.2 1
route ExtDatos 192.168.0.0 255.255.255.0 172.70.76.234 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
aaa authentication telnet console LOCAL
aaa authentication match ExtWan_authentication ExtWan LOCAL
aaa authorization command LOCAL
aaa authorization exec authentication-server
http server enable
http 172.16.90.0 255.255.255.128 Administracion
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
service resetinbound interface ExtDatos
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
quit
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 IntWan
ssh timeout 5
console timeout 0
!
tls-proxy maximum-session 1000
!
threat-detection basic-threat
threat-detection scanning-threat shun
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 190.15.128.72 source ExtWan
webvpn
!
class-map IntDatos-class
match default-inspection-traffic
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map IntDatos-policy
class IntDatos-class
inspect dns
inspect http
inspect icmp
inspect icmp error
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect http
inspect icmp
inspect icmp error
!
service-policy global_policy global
service-policy IntDatos-policy interface IntDatos
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privil
ege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
!
jumbo-frame reservation
!
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly 6
subscribe-to-alert-group configuration periodic monthly 6
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c92ed97271e22376b341c3a1b6ae8d54
: end
i come from
object-group network DEFAULT-PAT-SOURCE
object-group network Vlans
to
subnet 192.168.0.0 255.255.255.0
please help me
08-14-2013 11:33 PM
Hi,
Traffic between these 2 interfaces doesnt required NAT configuration atleast so thats fine.
You also seem to have a Global ACL configured
access-list global_access extended permit ip object-group VlansTerminal any
access-list global_access extended permit ip object-group DEFAULT-PAT-SOURCE any
access-list global_access extended permit ip 172.16.60.0 255.255.255.252 any
Though I am not sure what networks "VlansTerminal" contains.
Maybe your source addresses arent included in the above ACL?
Also there might be some routing related problem as I dont know how the routing behind the ASA on the LAN network is handled.
I can't see a problem with the ASA configurations unless the above ACL doesnt contain the source addresses you need.
- Jouni
08-16-2013 12:21 PM
thanks,
hello
perfect,
I need to get from the Internet to a local host and ssh, www I haven't DMZ
host 172.16.50.3
08-16-2013 12:28 PM
Hi,
Seems to me that you have several public IP addresses available so you could basicly give one public IP address to this host alone with the use of Static NAT
A Static NAT configuration could be configured like this (Use some free public IP address that IS NOT in any use at the moment)
object network SERVER
host 172.16.50.3
nat (IntWan,ExtWan) static
IF you DONT have an ACL attached to the "ExtWan" interface then you can configure this
access-list EXTWAN-IN remark Allow WWW and SSH to the server
access-list EXTWAN-IN permit tcp any object SERVER eq www
access-list EXTWAN-IN permit tcp any object SERVER eq ssh
access-group EXTWAN-IN in interface ExtWan
If you already have an ACL attached to the "ExtWan" then use that ACL name to insert the above rules.
Also, if you dont want to allow traffic from "any" source address then specify the source addresses you need allowed.
- Jouni
08-16-2013 01:01 PM
oohhh I have a new idol,
ok,
if I want to connect from another building my voip gateway should connect to a fw interface or create an access list hacio gateway.
?
thank you very much
08-16-2013 01:06 PM
Hi,
I am not quite sure what you mean by that.
- Jouni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide