SM24 with ASA SW and on-board 8 x 10GE optical ports. Can we add 2 x SM56 and 2 x FPR9K-NM-4X40G to same FPR 9300 chassis? Will it support that much backplane bandwidth with 40G modules? How much firewall throughput we can get in the firewall module SM56?
Can we put them into existing ASA cluster running on SM24 or we will have "2 x new firewalls" with 2 SM56? We have Nexus 3548-X switches for firewall clustering as per Cisco documentation.
Thanks. In existing chassis, 1 x SM-24 module is used, but during clustering, it also added "empty" modules in the cluster. So, do I need to reset everything and start from scratch? I guess only ASA config can be backed up and restored. The PDF does not describe ASA clustering in details.
Also, back plane physical connections are not explained much.
I'm not positive about the empty modules in the existing ASA cluster.You may need to backup the ASA config and start again with bootstrap. I'd recommend consulting with a Cisco TSA (technical solutions architect) or TAC first though as this is a pretty unusual use case.
Also, what FXOS release are you running? It was only with 2.6+ that we can mix logical devices in a chassis.