I am migrating ASA to FTD (FP 2100) and I am seeing that FP 2100 has two option/places to configure SNMP.
Option 1 in Devices > Plataform Settings as all other Firepower Devices.
Option 2 in Devices > Device Mangement exclusive to FP2100 series.
I am watching that Option 1 is the option to monitoring the firewall application, like data interfaces for example. In this option we must choose a security zone for monitoring, so I can´t choose management interface(used to FMC communication) for this purpose.
Option 2 is to monitoring the linux system inside the chassis. In this option I can choose the management interface for monitoring, but in this case I can´t monitor firewall application, like data interfaces for example.
I would like to know if my understanding is correct and if Cisco plans to unify SNMP management for Firepower appliances.
Radius server configuration for 802.1XServer radius test1Address ipv4 10.1.1.1Key 1234!Server radius test2Address ipv4 10.1.1.2Key 1234!aaa group server radius TEST-grserver name test1server name test2!aaa authentication dot1x default group TEST-graaa aut...
One of the biggest concept in VPN Technologies is NAT Traversal, like NAT Traversal in VOIP deployment with SIP Protocol, the history is always inside the payload to solve the Incompatibility between NAT and IPSEC like the Incompatibility between SIP prot...
"What is this 'Orbital Query Corner' thing", you ask? It's the name of an occasional series of articles, each discussing one particular point or use case for the Orbital advanced search feature that is available in Cisco Secure Endpoint starting at ...
0. The Issue
On 20 July 2021, Microsoft issued an alert for CVE-2021-36934 "Windows Elevation of Privilege Vulnerability".  The problem in this case is an overly permissive Access Control List (ACL) applied to system files, including the Se...