Hello, Wants to deployed MX105 at core level and FTD at perimeter level in our network. However i have procure utm licenses for MX appliances, not for FTD. 1. Can i achieve the url filtering at FTD after it gets filter from MX. 2. Wants to achieve lo...
Hi All, I'm having ftd 3100 series FW as Core and MX 105 as Perimeter Fw. Can i use CD-fmc to manage FTD fw Pls note- FTd is not directly connected to internet and we use it as a internal FW
Hi All, I have came through that Snort is only compatible with sensors embedded below Cisco products, However my organisation brought IE-3300 series OT switches. Please guide me here Cisco IC3000 Industrial Compute Gateway Cisco Catalyst 9300 Serie...
We are in the process of deploying some multi-instance FPR3130 pairs. The FPR3130's were supplied with 7.2.8-25 so we manually upgraded them to 7.4.2-172 and then onboarded them into the FMCv where we then converted them to multi-instance. We then ...
Dear Team, We have an FTD cluster in HA (a/p) managed by an FMC (all on version 7.4.2) and we are redesigning the architecture of the current solution. The new solution is intended to have two internet links (primary/secondary) with dynamic routing (...
Hello,We have a pair of Cisco ASA 5525-X and would like to migrate them to Cisco FPR-1140's.I started the migration and ended up at this screen: My intention was to set up a virtual FMC but I am not sure what version would satisfy my ASA units.Furthe...
Hello, A customer have about 20 Firepower 1010 H/A pairs. Randomly we will see alerts about high system CPU and at the same time there is also an alert about "Process vaultApp exited" This seems to match the following defect FTD Vault process exits ...
Just checking community to see best option to reach multiple internal say web servers from certain sites across WAN/internet on the FTD?I was thinking say manual static NAT to an object-group which contains the internal server objects or something?
LAN:192.168.88.254/24ASA5505(branch)WAN:60.0.0.1------Internet------WAN:59.0.0.1CP1555(HQ)LAN:192.168.169.254/24Cisco Adaptive Security Appliance Software Version 9.2(3)Checkpoint 1500 Appliance Version R81.10.10 (996002945)Here's partial running con...
Dear Team, Cisco Firepower 1120 NGFW peer failed after hotfix update. Current version 7.4.2.1-30 but after update on HA Cisco_FTD_SSP_FP1K_Hotfix_BR-7.4.2.2-1.sh.REL.tar , secondary HA device unable to ping & SSH also not accessible in GUI. Only acc...
All,I've been tasked with obtaining an alert whenever a security intelligence feed or list is added/removed/modified within Security Intelligence but only have been able to find a means to alert on events discovered from SI.Might anyone know of a way...
I have setup up a number of FTDS that are managed by FMC in CML labs. I have setup the in-built desktop in CML that is hanging off a FTD. I am able to get the internet via FTD-->Router (NAT)-->External Connector and I am able to get internet access f...
Trying to get a port forward setup for a server behind the firewall and having an issue getting it to work. The traffic appears to be dropping after touching the outside interface, even though an outside ACL is created for this traffic. Here are the ...
Hi All, Have 2 quantity of MX 105 with below part code licenses. Would i need per device licenses or 1 work as im going to configure warmspare Meraki MX Large Essentials EA 3.0 LIC and Support
Greetings - We have a Firepower device managed via FMC and need add a large number of ACLs to the control plane. Adding the ACLs using the GUI is time consuming and cumbersome to maintain. This is a process we would historically script with the ASA...
