08-12-2009 06:43 AM - edited 02-21-2020 03:37 AM
Following the steps in:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00809f0d75.shtml#svg to configure SBL (ASDM), when I try to assign the XML profile to the group policy (step 11), I hit OK after choosing the XML file and it doesn't take. Just comes back with the "Add SSL VPN Client Profiles" dialog.
I used the XML file provided with the AnyConnect client and just changed the host settings, so the syntax should be right.
Any other suggestions?
08-12-2009 11:11 AM
You can validate the the xml schema at this site:
08-12-2009 11:18 AM
Thanks for the link. Ran it, all good.
Well formed: VALID
Schema validation: VALID
Now what? Is there a setting somewhere I missed? I followed the instructions.
08-12-2009 11:24 AM
what version of ASA and asdm are u using?
what happens if you use cli instead?
08-12-2009 11:32 AM
ASA 8.2(1)
ASDM 6.2(1)
I'm not the most versed in CLI so I am not totally sure of the right commands. When I followed the examples in the guide, I kept getting an invalid error in step 3 "svc profiles NAME disk0:/..." The indicator was showing under the NAME.
08-17-2009 01:50 PM
Anyone? Anything?
Bump.
07-13-2010 04:00 PM
+1 here. I am using ASA code 8.2(2) and ASDM 6.3(1). When editing the group policy, in the "SSL VPN Client" section, I change the "Client Profile to Download" from "-- None --" to one of my client profiles and click 'OK.' The 'Apply' button does not become clickable, and when I re-open the group policy for editing, the setting is back to None.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide