09-22-2008 03:20 AM - edited 03-11-2019 06:47 AM
Hi all,
I have a client who is trying to stress test a site by making around 800 connections from a single IP address, Obviously the ASA sees this as a attack and starts dropping connections.
This morning this was proven by disabling Threat detection at which point all was OK. However no one is comfortable with extended testing with TD off. Could anyone tell me what the threshholds are for threat detection to start dropping packets. I have searched with google but no joy.
Thanks in advance,
Scott
Solved! Go to Solution.
09-22-2008 05:47 AM
Issue :
sh run all | include threat-detection
Change the defaults as necessary.
Do rate helpful posts.
Regards,
Sushil
09-22-2008 05:08 AM
What device and IOS version are you using?
09-22-2008 05:47 AM
Issue :
sh run all | include threat-detection
Change the defaults as necessary.
Do rate helpful posts.
Regards,
Sushil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide