Top 10 Access Rules in ASDM shows the same rule 3 times
Our ASA 5510 appears to be working perfectly, but the firewall dashboard shows the same access rule 3 times. I'm running ASA 8.2(5) and I suspect that after setting up NAT, I have configured the access rule on the wrong interface. It's working, but perhaps not as efficiently as it could be.
This article is intended to be a simple example of configuring AnyConnect relevant syslog messages to be sent from the ASA to a Syslog server. The syslog server in this example is Spunk but almost any syslog server should be do the job. The ...
NGFW Spring 2020 Releases
It’s official! FTD 6.6, ASA 9.14.1, and FXOS 2.8 have been released. We want to thank the hundreds of team members for the tens of thousands of man-hours dedicated to driving this critical release over the finish line. 120...
Hi,I was trying to 2fa cisco duo , all the required settings done as per below . The problem is duo cloud does nti not getting any request from the asa . So I am not getting any code from the duo https://www.youtube.com/watch?v=6nEvmc8wji...
This event continues the conversation of our recent Community Ask Me Anything event "Secure Remote Workers".
To participate in this event, please use the button to ask your questions
Here’s your ch...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
Early Access introduces a...