05-22-2014 02:54 PM - edited 03-11-2019 09:14 PM
I am using a 5515-X in single device mode. Software is version 9.2.1.2-69.
I noticed a couple things that I am not sure are a problem or not. When I go to the configuration overview tab PRSM shows mode of the ASA CX as "unknown". Also the User Guide says I should see a "traffic redirection" tab under configuration policies/settings but I don't see that.
I guess I can configure traffic redirection with ASDM but just wondering if this is normal, or cosmetic bug or something else?
Thanks,
Diego
Solved! Go to Solution.
05-22-2014 03:07 PM
If you're running single device mode (on-box PRSM) you cannot manage the ASA configuration like you can with the off-box PRSM. Note this section of the user guide which states:
"Traffic Redirection—(ASA, Multiple Device mode only.) Configure traffic redirection from the ASA to its CX module."
05-23-2014 06:19 AM
I'd say it's cosmetic.
I don't have an multiple device mode PRSM to compare but the single device mode one I'm looking at also shows "unknown".
I believe in multiple device mode this would indicate either "managed" or "monitor only".
05-22-2014 03:07 PM
If you're running single device mode (on-box PRSM) you cannot manage the ASA configuration like you can with the off-box PRSM. Note this section of the user guide which states:
"Traffic Redirection—(ASA, Multiple Device mode only.) Configure traffic redirection from the ASA to its CX module."
05-22-2014 08:11 PM
Yes, seems like that is exactly the case for the "traffic redirection" tab. what about the "unknown" for the mode in the overview screen? Cosmetic or sign of something wrong?
Thanks,
Diego
05-23-2014 06:19 AM
I'd say it's cosmetic.
I don't have an multiple device mode PRSM to compare but the single device mode one I'm looking at also shows "unknown".
I believe in multiple device mode this would indicate either "managed" or "monitor only".
05-23-2014 07:49 AM
Cool. Thx
05-28-2014 11:13 PM
Hi Marvin,
Information provided in very crisp and simple manner. Keep the good work going. I will be converting this discussion to a document. Link of the same will be posted.
Regards,
Anim Saxena
Community Manager - Security
05-29-2014 08:32 PM
Thanks for the encouragement, Anim.
BR,
- Marvin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide