cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

131
Views
0
Helpful
1
Replies
usmanghani255
Beginner

Two Servers in ASA Firewall not communicating

Hi Team,

I got a question, how to troubleshoot and mitigate the issue. Here is the seen.

10.25.105.10 in DMZ of ASA Cannot communicate with 10.153.16.152 lies inside of ASA. Where to start to trouble shoot this ?

So far, i only did packet tracer from DMZ to Inside    and it comes up with following:

packet-tracer input DMZ tcp 10.25.105.10 8080 10.153.16.152 8080 det

 

Phase 1 Allowed

Phase 2 Allowed

Phase 3 Allowed

   

Drop-reason: (acl-drop) Flow is denied by configured rule

Phase: 4
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0x46516a8, priority=11, domain=permit, deny=true
        hits=1955, user_data=0x5, cs_id=0x0, flags=0x0, protocol=0
        src ip=0.0.0.0, mask=0.0.0.0, port=0
        dst ip=0.0.0.0, mask=0.0.0.0, port=0

Plz guide me a si am newbe in Security. Thanks

1 REPLY 1
jocamare
Enthusiast

Post the config or check the interface Access-lists.

Content for Community-Ad