05-09-2016 01:52 AM - edited 03-12-2019 12:43 AM
Hi All,
I am having a problem accessing a couple of newly setup ASA's via the inside interface over a site-to-site VPN. I can SSH etc to nodes either side of the ASA no problem and from the ASA to the Monitoring Server at the other end of the tunnel that I want to model the ASA's on but for the life of me I can't seem to be able to manage them from the inside interface.
Snippet of relevant config below. VPN is all up and working correctly so have left that part of the config out for now.
no ssh stricthostkeycheck
ssh ***.***.***.*** 255.255.255.0 Outside
ssh 0.0.0.0 0.0.0.0 Inside
ssh 10.0.0.0 255.0.0.0 MGT
ssh timeout 60
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access Inside
Any help would be much appreciated.
Solved! Go to Solution.
05-09-2016 01:56 AM
Hi,
Are you able to ping the inside IP ?
If you are using
Regards,
Aditya
Please rate helpful posts and mark correct answers.
05-09-2016 01:56 AM
Hi,
Are you able to ping the inside IP ?
If you are using
Regards,
Aditya
Please rate helpful posts and mark correct answers.
05-09-2016 02:32 AM
Thanks Aditya - I believed with the NAT statement we had in place we did not need the Route-lookup keyword at the end. However after adding the route lookup I can now access the inside interface so we must have been wrong.
Thanks for your help, much appreciated :)
Shaun
05-09-2016 02:33 AM
Hi Shaun,
Glad to assist. :)
Regards,
Aditya
04-13-2020 12:32 AM
Hi,
Im also facing same issue. unable to access inside interface IP over S2S VPN. after configuring route lookup in NAT , able to ssh inside IP (primary FW). im unable to access secondary FW of HA pair. Please help.
04-13-2020 01:18 AM - edited 04-13-2020 01:20 AM
Unfortunately this is not supported:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCte84561/?rfs=iqvred
04-13-2020 01:58 AM
Thanks for your quick response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide