cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

535
Views
0
Helpful
3
Replies
Ranbeckycr_2
Beginner

Upgrade Cisco Pix Firewall

Experts,

Can this PIX be upgraded to the latest 8.X version?

Below the show version

FW# sh ver

Cisco PIX Firewall Version 6.3(4)

Cisco PIX Device Manager Version 3.0(3)

Compiled on Fri 02-Jul-04 00:07 by morlee

PerFW up 32 mins 40 secs

Hardware:   PIX-515, 64 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0004.9ad0.e148, irq 11

1: ethernet1: address is 0004.9ad0.e149, irq 10

2: ethernet2: address is 00e0.b605.1f47, irq 9

3: ethernet3: address is 00e0.b605.1f46, irq 9

4: ethernet4: address is 00e0.b605.1f45, irq 9

5: ethernet5: address is 00e0.b605.1f44, irq 9

Licensed Features:

Failover:                    Enabled

VPN-DES:                     Enabled

VPN-3DES-AES:                Enabled

Maximum Physical Interfaces: 6

Maximum Interfaces:          10

Cut-through Proxy:           Enabled

Guards:                      Enabled

URL-filtering:               Enabled

Inside Hosts:                Unlimited

Throughput:                  Unlimited

IKE peers:                   Unlimited

This PIX has an Unrestricted (UR) license.

Serial Number: 406102269 (0x1834a0fd)

Configuration has not been modified since last system restart.

FW#

Thanks for the help.

3 REPLIES 3
varrao
Advocate

Hi Randall,

Yes it can be upgraded very well, but just take care of the hardware requirements for PIX 8.x, youw ill find it here:

http://www.cisco.com/en/US/docs/security/pix/pix80/release/notes/pixrn80.html

But first go to 7.2---> 8.x

Please rate if helpful.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks,
Varun Rao

Varun,

Thank you for your help.

I have one quick question, this pix is not in failover, it is standalone but it has Unrestricted license. It only has 64Mb of Ram. Will I have any problems based on your link recommendation?

Memory Requirements:

If you are using a PIX 515/515E running PIX Version 6.2/6.3, you must increase your memory before upgrading to PIX Version 8.0(2). This version requires at least 64 MB of RAM for Restricted (R) licenses and 128 MB of RAM for Unrestricted (UR) and Failover (FO) licenses

What is the difference between the restricted Licenses and the Unrestricted Licenses?

Thanks!

Hi Randall,

Thats correct, with the UR license you would need more RAM since there are more number of features enabled in this license which eats up more amount of memory.

Hope that helps.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks,
Varun Rao
Create
Recognize Your Peers
Content for Community-Ad