11-23-2022 01:49 AM
Hi all,
as per title I have to upgrade software version of an ASA 5525X.
actually my current version is 9.1(1) so for the ASA upgrade path i need upgrade an interim version 9.1(2) then I can proceed with the 9.12(x) or 9.14(x). My problem is: version 9.1(2) is no longer present on cisco site to download! Can I directly upgrade to the target version, in my case "asa9-14-4-17-smp-k8.bin" ? Do you have any suggestion ?
just for info I'll proceed with cli
thank you in advance for your support
Solved! Go to Solution.
11-23-2022 02:53 AM
Hi @mymono9,
You are right about the upgrade path, and you are also right about the SW download (it is no longer available on Cisco portal). Upgrade path should guarantee hitless upgrade, and smooth configuration migration. However, you can migrate directly, with possible consequences (e.g. it will not be hitless, you'll loose part of config and similar).
I see several options here, depending on your environment:
Kind regards,
Milos
11-23-2022 02:53 AM
Hi @mymono9,
You are right about the upgrade path, and you are also right about the SW download (it is no longer available on Cisco portal). Upgrade path should guarantee hitless upgrade, and smooth configuration migration. However, you can migrate directly, with possible consequences (e.g. it will not be hitless, you'll loose part of config and similar).
I see several options here, depending on your environment:
Kind regards,
Milos
11-23-2022 02:57 AM
thank you very much @Milos_Jovanovic !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide