04-30-2012 12:37 PM - edited 03-11-2019 04:00 PM
A virtual server currently has Exchange installed on it with load balancing on our network. Each NIC has its own IP address and they want one external address for it to NAT to. Looking at our ASA, we can't overlap addresses...meaning I get an error when I try to NAT 2 internal addresses to 1 external. How can this be accomplished?
04-30-2012 02:21 PM
Have you tried PAT?
Sent from Cisco Technical Support iPad App
05-04-2012 08:53 AM
yes...that didn't resolve our issue. :-/
05-04-2012 09:30 AM
What version do you have? It can be done with an special configuration on 8.2. If you are in version 8.3 or higher you may want to look at Many to Few NAT configuration.
Mike
05-04-2012 09:45 AM
PAT fixes 99% - post your config for review.
05-04-2012 09:47 AM
What about inbound traffic on Same services?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide