Virtuel FMC:er andAppliances with OS Cisco Fire Linux OS 6.4.0 (build2) compatible with ESXi 7.0?

[TommyNilsson0342]

Virtuel FMC:er andAppliances with OS Cisco Fire Linux OS 6.4.0 (build2) compatible with ESXi 7.0?

Unable to interpet this document.

https://www.cisco.com/c/en/us/td/docs/security/firepower/compatibility/firepower-compatibility.html

[Rob Ingram]

Hi,

No, FTD 6.4 is not compatible with ESXi 7.0, only ESXi 6.0 or 6.5

ESXi 7.0 is not compatible with FTD 6.5 or 6.7

HTH

[balaji.bandi · Accepted solution]

Hope this question related to FMCv ? (Not FTD ) then here is the compatability matrix :

Firepower Management Center Virtual (FMCv) Platforms:

Version 6.6.0 FMCv software is supported in both on-premises and cloud-based deployments:

• FMCv and FMCv 300 for VMware vSphere/VMware ESXi 6.0, 6.5, or 6.7

https://www.cisco.com/c/en/us/td/docs/security/firepower/660/relnotes/firepower-release-notes-660/compatibility.html

[Ruben Cocheno]

@TommyNilsson0342 

it's vFMC is supported only on VMware ESX 6.5 and 6.0, but by end of year it should support ESX 7.0, from what i've heard.