Re: Vpn 3000 and MIB

jrevald · ‎10-31-2001

Hi there...

anyone have or know where to get a MIB for the VPN 3000 box?

I want to see if I, through SNMP, can trigger the box to tftp or ftp the config to a remote server for backup purposes. Has anyone tried anything like that with this product?

Thanks,

Jesper Revald

mmellet · ‎11-06-2001

All of Cisco’s published mibs are here Cisco’s MIB’s are here http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml but I don’t see any for the concentrators yet. Fairly new acquisition so I would guess they are still working on those.

rmushtaq · ‎02-23-2002

True, but not for VPN3000. VPN3000 MIBs are available at: http://www.cisco.com/kobayashi/sw-center/vpn/3000/

noc · ‎12-26-2001

can not be done (yet) better luck writing a perl script that uses the net::telnet module

you can telnet to the concentrator; tell it to

tftp file CONFIG to where you want..

I run this nightly on mine.

Nelson Rodrigues · ‎02-25-2002

Hi Jesper, The VPN 3000 doesn't support SNMP configuration SETs . As of Release 3.5 it does support full configuration SET management via XML which runs securely over HTTPS and Telnet/SSH.

Nelson Rodrigues

Cisco Systems

mpoff · ‎07-03-2002

Nelson,

Where can I find documentation on management via XML?

Thanks

Mike Poff

Nelson Rodrigues · ‎10-13-2002

Mike, what is your email address. I can drop the XML information on Cisco Special File Access and send you the info.

Thanks.

Nelson

rmushtaq · ‎10-14-2002

You can get the VPN 3000 MIBs from:

http://www.cisco.com/kobayashi/sw-center/vpn/3000/

and also refer to:

http://www.cisco.com/warp/public/471/vpn3K_mibs.html