cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

414
Views
0
Helpful
5
Replies
mitang.prajapati
Beginner

VPN / Limiting access

Hello

I have configure one remote access VPN, now when we try to connect server from VPN client then its conneted sucessfully but when we try to conncet server then i got whole server from dmz and inside zone.

So can you help me how can we filter traffic to access limited? means like for perticular server if we want to access then what should we have to configure.

5 REPLIES 5
csaxena
Cisco Employee

Hello Mitang,

You can consider using VPN filter.  Here is the link  :http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml

Hope this helps. Please reply back if you need any further assistance.

Regards,
Chirag
P.S.: Please mark this thread as answered if you feel your query is answered. Do rate helpful posts.

Hello Chirag,

Thanks for update,

Actully we are working on asa803.pix.

can you suggest on this.

Hello Mitang,

VPN filters can be used on ASA/PIX 7.0 or above. If you are running on ASA/PIX 8.0.3, you can consider using this.http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml

Hope this helps. Please reply back if you need any further assistance.

Regards,
Chirag
P.S.: Please mark this thread as answered if you feel your query is answered. Do rate helpful posts.

Hello chirag,

thaks for support,

this command are not available in asa803 serirs IOS.

Hello Mitang,

The document clearly states PIX/ASA 7.0 and  later and if even i have used these commands on few occasions. Can you please paste the commands which you are trying to enter and error message you are receiving.

Regards,
Chirag

Create
Recognize Your Peers
Polls
Which of these topics should we host an event in the Community?

Top Choice: ISE Demo (50%)

Content for Community-Ad