can i have on this attached network picture how to configure vpn site to site from remote location to main headoffice location
in remote location i have
in HO location they have
have only one way connection from remote location to web server (main HO) (THE CONFIGURATION WILL ONLY ON MY SIDE ASA5516-X)
can i have the step for vpv- site to site example configurations
thanks check attached pic
thanks a lot for your great help
yes of course my network already configured and working live with users now but the static ip address we ordered it for vpn connectivity recently after we made our configurations so what is pending is to configure the static ip address on our network to be reachable
so your configuration that you sent to me is the only pending to my network for static ip to be recognized on it
correct me if im wrong
just wanna ask about the the outside default route on asa because i dont have a router , i have core switch only connected to ASA which directly connected to isp router
so the configuration of default route on asa will be :
Route outside 0.0.0.0 0.0.0.0 next hope ip address (ip of the wan interface of isp router which assign on it the static ip ?)
is it correct ?
What do you mean Core Switch? Layer 3 Switch? do you have Routed Vlans?
So you have connected the ISP side to the Switch? So if its a Layer 3 Switch are you going to assign that IP on the Switch? I don't understand...
this is a layer 2 switch only but vlans creations - dhcp servers for each vlan with management ip addresses
so its only layer 2 switch not more , so in that case whats the answer of my question :)
thanks many thanks
i have problem after create the vpn tunnel
The traffic is clearly not sent via the VPN tunnel but directly to the DSL router and the internet, until it reaches a dead end.
do u have any idea ? maybe the routing problem ? do i have to make default route or something ?