After upfating fpr2130 to version 9.18.3.56 I get wrong data of bandwidth interfaces (I have 4 fpr2130 and all of the, with this BUG!)
ifname
IF-MIB::ifName.2 = STRING: Internal-Data0/1
IF-MIB::ifName.3 = STRING: management
IF-MIB::ifName.4 = STRING: Internal-Data1/1
IF-MIB::ifName.5 = STRING: Ethernet1/1
IF-MIB::ifName.6 = STRING: Ethernet1/2
IF-MIB::ifName.7 = STRING: Ethernet1/3
IF-MIB::ifName.8 = STRING: Ethernet1/4
IF-MIB::ifName.9 = STRING: Ethernet1/5
IF-MIB::ifName.10 = STRING: Ethernet1/6
IF-MIB::ifName.11 = STRING: Ethernet1/7
IF-MIB::ifName.12 = STRING: Ethernet1/8
IF-MIB::ifName.13 = STRING: Ethernet1/9
IF-MIB::ifName.14 = STRING: Ethernet1/10
IF-MIB::ifName.15 = STRING: Ethernet1/11
IF-MIB::ifName.16 = STRING: Port-channel10
IF-MIB::ifName.17 = STRING: Ethernet1/12
IF-MIB::ifName.18 = STRING: Ethernet1/13
IF-MIB::ifName.19 = STRING: Port-channel1
IF-MIB::ifName.20 = STRING: Ethernet1/14
IF-MIB::ifName.21 = STRING: Ethernet1/15
IF-MIB::ifName.22 = STRING: Ethernet1/16
IF-MIB::ifName.23 = STRING: Port-channel1.994
IF-MIB::ifName.24 = STRING: Port-channel1.997
IF-MIB::ifName.25 = STRING: Port-channel10.10
IF-MIB::ifName.26 = STRING: Port-channel10.11
ifhighspeed
IF-MIB::ifHighSpeed.2 = Gauge32: 0
IF-MIB::ifHighSpeed.3 = Gauge32: 1000
IF-MIB::ifHighSpeed.4 = Gauge32: 1000
IF-MIB::ifHighSpeed.5 = Gauge32: 1000
IF-MIB::ifHighSpeed.6 = Gauge32: 1000
IF-MIB::ifHighSpeed.7 = Gauge32: 1000
IF-MIB::ifHighSpeed.8 = Gauge32: 1000
IF-MIB::ifHighSpeed.9 = Gauge32: 1000
IF-MIB::ifHighSpeed.10 = Gauge32: 1000
IF-MIB::ifHighSpeed.11 = Gauge32: 1000
IF-MIB::ifHighSpeed.12 = Gauge32: 1000
IF-MIB::ifHighSpeed.13 = Gauge32: 1000
IF-MIB::ifHighSpeed.14 = Gauge32: 1000
IF-MIB::ifHighSpeed.15 = Gauge32: 1000
IF-MIB::ifHighSpeed.16 = Gauge32: 0
IF-MIB::ifHighSpeed.17 = Gauge32: 1000
IF-MIB::ifHighSpeed.18 = Gauge32: 1000
IF-MIB::ifHighSpeed.19 = Gauge32: 0
IF-MIB::ifHighSpeed.20 = Gauge32: 1000
IF-MIB::ifHighSpeed.21 = Gauge32: 1000
IF-MIB::ifHighSpeed.22 = Gauge32: 1000
IF-MIB::ifHighSpeed.23 = Gauge32: 0
IF-MIB::ifHighSpeed.24 = Gauge32: 0
IF-MIB::ifName.18 = STRING: 1
IF-MIB::ifName.22 = STRING: Port-channel1.839
IF-MIB::ifName.23 = STRING: Port-channel1.855
IF-MIB::ifName.24 = STRING: Port-channel1.972
IF-MIB::ifName.25 = STRING: Port-channel1.977
IF-MIB::ifName.26 = STRING: Port-channel1.993
All of the Port-channels with BW 0 before it was 20000 Mb
All of the 10gbps with BW 1000 before it was 10000 Mb
and some of the context doesn't answer on snmp.... (if we have multicontext mode) before update it works
