Cisco 3650 cannot boot up

[Cam79100]

Dear all,

please kindly advise how to can configure on Rommon on switch 3650

please kindly see in the attach file.

Best regards,

[Leo Laohoo]

---

@Cam79100 wrote:

Emergency Install failed - unable to download bundle

---

Copy the image into a USB thumb drive and launch the Emergency Install that way.

[Cam79100]

Dear Sir,

i try boot from USB but still the same

rommon ! > boot usb:/cat3k_caa-universalk9.16.12.03a.SPA.bin
usb:/cat3k_caa-universalk9.16.12.03a.SPA.bin: no such device
Cannot open file usb:/cat3k_caa-universalk9.16.12.03a.SPA.bin
usage: boot [<filename>] [<cmdline>]

rommon ! > dir

List of filesystems currently registered:

xmodem[0]: (read-only)
null[1]: (read-write)
bs[3]: (read-only)
flash[18]: (read-only)
tftp[19]: (read-write)
usbflash0[20]: (read-write)

rommon ! > boot usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin
Reading full image into memory.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................done
Bundle Image
--------------------------------------
Kernel Address : 0x5344d6e0
Kernel Size : 0x438410/4424720
Initramfs Address : 0x53885af0
Initramfs Size : 0x1abc7cc/28035020
Compression Format: mzip

Bootable image at @ ram:0x5344d6e0
Bootable image segment 0 address range [0x81100000, 0x81da5280] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin" uncompressed and installed, entry point: 0x81895bf0
Loading Linux kernel with entry point 0x81895bf0 ...
Bootloader: Done loading app on core_mask: 0xf

### Launching Linux Kernel (flags = 0x5)

Linux version 4.9.187 (xelinux@sjc-xelinux2) (gcc version 5.3.0 (GCC) ) #1 SMP Wed Dec 11 09:25:00 PST 2019
CVMSEG size: 2 cache lines (256 bytes)
Cavium Inc. SDK-5.1.0
bootconsole [early0] enabled
CPU0 revision is: 000d900a (Cavium Octeon II)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Aug 13 09:25:33.387: %BOOT-3-SYSD_STARTFAIL: R0/0: Failed to launch boot task boothelper_autoupgrade.service ( exit-code )

Both links down, not waiting for other switches
Switch number is 2

Chassis 2 reloading, reason - Active/standby selection failed in 1+1 Mode
reload fp action requested
rp processes exit with reload switch code

watchdog: watchdog0: watchdog did not stop!
reboot: Restarting system

Booting...
The system is not configured to boot automatically. The
following command will finish loading the operating system
software:

boot

rommon ! > flash_init
Initializing Flash...

flashfs[7]: 0 files, 1 directories
flashfs[7]: 0 orphaned files, 0 orphaned directories
flashfs[7]: Total bytes: 6784000
flashfs[7]: Bytes used: 1024
flashfs[7]: Bytes available: 6782976
flashfs[7]: flashfs fsck took 2 seconds....done Initializing Flash.

rommon ! > load_helper
Unknown cmd: load_helper

[Leo Laohoo]

Uhhhh ... no.  Run the Emergency Install but point the file in the USB stick.  

[Cam79100]

still issue after book it go to rommon ! >

---

@Cam79100 wrote:

Dear all,

please kindly advise how to can configure on Rommon on switch 3650

please kindly see in the attach file.

Best regards,

---

rommon ! > emergency-install usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin
The bootflash will be erased during install operation, continue (y/n)?y
Starting emergency recovery (usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin)...
Reading full image into memory........................done
Bundle Image
--------------------------------------
Kernel Address : 0x537795d4
Kernel Size : 0x3faba9/4172713
Initramfs Address : 0x53b74180
Initramfs Size : 0xdf2d3b/14626107
Compression Format: .mzip

Bootable image at @ ram:0x537795d4
Bootable image segment 0 address range [0x81100000, 0x820a0000] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "sda9:cat3k_caa-recovery.bin" uncompressed and installed, entry point: 0x816733a0
Loading Linux kernel with entry point 0x816733a0 ...
Bootloader: Done loading app on core_mask: 0xf

### Launching Linux Kernel (flags = 0x5)

Initiating Emergency Installation of bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin

Reading bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin...

Validating bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin...
Installing bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin...
Verifying bundle usbflash0:/cat3k_caa-universalk9.16.12.03a.SPA.bin...
Package cat3k_caa-guestshell.16.12.03a.SPA.pkg is Digitally Signed
Package cat3k_caa-rpbase.16.12.03a.SPA.pkg is Digitally Signed
Package cat3k_caa-rpcore.16.12.03a.SPA.pkg is Digitally Signed
Package cat3k_caa-srdriver.16.12.03a.SPA.pkg is Digitally Signed
Package cat3k_caa-webui.16.12.03a.SPA.pkg is Digitally Signed
Preparing flash...
Syncing device...
Emergency Install successful... Rebooting
Restarting system.

Booting...Up 10 Mbps Full duplex (port 0) (SGMII)
Down (port 0) (SGMII)

The system is not configured to boot automatically. The
following command will finish loading the operating system
software:

boot

rommon ! > Up 1000 Mbps Full duplex (port 0) (SGMII)

rommon ! > boot

Getting rest of image
Reading full image into memory...Check base package header ...: done = 16384
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 32823196
Bundle Image
--------------------------------------
Kernel Address : 0x5377b3c0
Kernel Size : 0x438410/4424720
Initramfs Address : 0x53bb37d0
Initramfs Size : 0x1abc7cc/28035020
Compression Format: mzip

Bootable image at @ ram:0x5377b3c0
Bootable image segment 0 address range [0x81100000, 0x81da5280] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 623
Loading Linux kernel with entry point 0x81895bf0 ...
Bootloader: Done loading app on core_mask: 0xf

### Launching Linux Kernel (flags = 0x5)

Linux version 4.9.187 (xelinux@sjc-xelinux2) (gcc version 5.3.0 (GCC) ) #1 SMP Wed Dec 11 09:25:00 PST 2019
CVMSEG size: 2 cache lines (256 bytes)
Cavium Inc. SDK-5.1.0
bootconsole [early0] enabled
CPU0 revision is: 000d900a (Cavium Octeon II)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
%IOSXEBOOT-ce3e6257432740b7a8f733bda404ab48-new_cksum: (rp/0): 4
%IOSXEBOOT-ce3e6257432740b7a8f733bda404ab48-saved_cksum: (rp/0): 4

Both links down, not waiting for other switches
Switch number is 2

Chassis 2 reloading, reason - Active/standby selection failed in 1+1 Mode
reload fp action requested
rp processes exit with reload switch code

watchdog: watchdog0: watchdog did not stop!
reboot: Restarting system

Booting...Up 10 Mbps Full duplex (port 0) (SGMII)
Down (port 0) (SGMII)

The system is not configured to boot automatically. The
following command will finish loading the operating system
software:

boot

rommon ! >
Up 1000 Mbps Full duplex (port 0) (SGMII)

[Leo Laohoo]

Post the complete ROMMON command "set".

[Cam79100]

Please kindly see 

rommon ! > set
?=
ABNORMAL_RESET_COUNT=2
ASIC_PCI_RESET=1
AUTOREBOOT_RESTORE=0
BOOT=flash:packages.conf
BOOT_LOADER_UPGRADE_DISABLE=0
BSI=0
BYPASS_STARTUP_CFG=1
BYPASS_STARTUP_CONFIG=1
BYPAS_STARTUP_CONFIG=0
Boot=cat3k_caa-universalk9.16.12.03a.SPA.bin
CFG_MODEL_NUM=WS-C3650-24TS-S
CLEI_CODE_NUMBER=IPMV810BRE
CSR_PCIERST_DISCONNECTED=yes
ConfigReg=0x2102
DEFAULT_GATEWAY=172.27.74.1
DEFAULT_ROUTER=10.1.100.1
ECI_CODE_NUMBER=470063
IP=ADDRESS=192.168.1.2
IP_ADDR=10.1.100.2/255.255.255.0
IP_ADDRESS=172.27.74.111
IP_SUBNET_MASK=255.255.255.0
LICENSE_BOOT_LEVEL=ipbasek9,all:ngwc;
MAC_ADDR=7C:31:0E:F7:EA:80
MANUAL_BOOT=yes
MODEL_NUM=WS-C3650-24TS
MODEL_REVISION_NUM=W0
MOTHERBOARD_ASSEMBLY_NUM=73-15898-06
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=FDO23501KQ0
PS1=rommon ! >
RANDOM_NUM=1856588323
RECOVERY_BUNDLE=sda9:cat3k_caa-recovery.bin
RommonBuild=5
STACK_1_1=0_1
SWITCH_IGNORE_STARTP_CFG=1
SWITCH_IGNORE_STARTUP_CFG=0
SWITCH_IGNORE_STARTUP_CONFIG=0
SWITCH_IGNORE_STARUP_CFG=1
SWITCH_NUMBER=2
SWITH_IGNORE_STARTUP_CONFIG=0
SYSTEM_SERIAL_NUM=FDO2351M0XX
TAN_NUM=800-41246-03
TAN_REVISION_NUMBER=F0
TEMPLATE=advanced
TERMLINES=0
TFTP_SERVER=172.19.64.31
VERSION_ID=V04
ip=subet_mask=255.255.255.0

rommon ! >

[Leo Laohoo]

---

@Cam79100 wrote:

BYPASS_STARTUP_CFG=1
BYPASS_STARTUP_CONFIG=1
BYPAS_STARTUP_CONFIG=0
SWITCH_IGNORE_STARTP_CFG=1
SWITCH_IGNORE_STARTUP_CFG=0
SWITCH_IGNORE_STARTUP_CONFIG=0
SWITCH_IGNORE_STARUP_CFG=1

---

WTF.  

---

@Cam79100 wrote:

MANUAL_BOOT=yes

---

Who messed up the switch????

[Leo Laohoo]

unset ip=subet_mask=255.255.255.0
unset BYPASS_STARTUP_CFG=1
unset BYPASS_STARTUP_CONFIG=1
unset BYPAS_STARTUP_CONFIG=0
unset Boot=cat3k_caa-universalk9.16.12.03a.SPA.bin
unset ConfigReg=0x2102
unset RommonBuild=5
unset SWITCH_IGNORE_STARTP_CFG=1
unset SWITCH_IGNORE_STARTUP_CFG=0
unset SWITCH_IGNORE_STARTUP_CONFIG=0
unset SWITCH_IGNORE_STARUP_CFG=1
unset SWITH_IGNORE_STARTUP_CONFIG=0

Enter these line-by-line and then reboot the switch.

If the switch boots up in ROMMON, post the complete output to the "set" command.

[Cam79100]

Dear Sir

rommon ! > set
?=
ABNORMAL_RESET_COUNT=4
ASIC_PCI_RESET=1
AUTOREBOOT_RESTORE=0
BOOT=flash:packages.conf
BOOT_LOADER_UPGRADE_DISABLE=0
BSI=0
BYPASS_STARTUP_CFG=1
BYPASS_STARTUP_CONFIG=1
BYPAS_STARTUP_CONFIG=0
Boot=cat3k_caa-universalk9.16.12.03a.SPA.bin
CFG_MODEL_NUM=WS-C3650-24TS-S
CLEI_CODE_NUMBER=IPMV810BRE
CSR_PCIERST_DISCONNECTED=yes
ConfigReg=0x2102
DEFAULT_GATEWAY=172.27.74.1
DEFAULT_ROUTER=10.1.100.1
ECI_CODE_NUMBER=470063
IP=ADDRESS=192.168.1.2
IP_ADDR=10.1.100.2/255.255.255.0
IP_ADDRESS=172.27.74.111
IP_SUBNET_MASK=255.255.255.0
LICENSE_BOOT_LEVEL=ipbasek9,all:ngwc;
MAC_ADDR=7C:31:0E:F7:EA:80
MANUAL_BOOT=yes
MODEL_NUM=WS-C3650-24TS
MODEL_REVISION_NUM=W0
MOTHERBOARD_ASSEMBLY_NUM=73-15898-06
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=FDO23501KQ0
PS1=rommon ! >
RANDOM_NUM=1856588323
RECOVERY_BUNDLE=sda9:cat3k_caa-recovery.bin
RommonBuild=5
STACK_1_1=0_1
SWITCH_IGNORE_STARTP_CFG=1
SWITCH_IGNORE_STARTUP_CFG=0
SWITCH_IGNORE_STARTUP_CONFIG=0
SWITCH_IGNORE_STARUP_CFG=1
SWITCH_NUMBER=2
SWITH_IGNORE_STARTUP_CONFIG=0
SYSTEM_SERIAL_NUM=FDO2351M0XX
TAN_NUM=800-41246-03
TAN_REVISION_NUMBER=F0
TEMPLATE=advanced
TERMLINES=0
TFTP_SERVER=172.19.64.31
VERSION_ID=V04
ip=subet_mask=255.255.255.0

rommon ! >

===========================
may i ask about stack , currently i have 3650-TS-S and 3650-TS-L( man IOS lanbase and IPbase) can we connect stack together ?

[Cam79100]

Dear all,

do you have any advise ?

Best Regards,