A fiber optic reflector is an optical passive device constructed in a short segment of optical fiber that reflects particular wavelengths of light and transmits all others that are not within the specific reflection wavelength range.
Common types include adapter type and pigtail type. HYC's SC reflector is a kind of reflector based on SC connector package. SC/APC and SC/PC interfaces are available.
The reflector for 1650 nm reflects all wavelengths from 1645 nm to 1655 nm. With its low insertion loss at the transmission wavelength range and high reflectance at the reflected wavelength range it is the ideal optical termination for link monitoring of FTTx networks , FTTx reflectors are suitable for both point to point (PTP) and point to multipoint (PTMP) networks. They are preferably installed at the subscriber’s homes in order to highlight these positions in the OTDR trace by distinct reflections of the test signal.
HYC SC reflector has a transmission wavelength (1260~1625nm), high reflectivity, low insertion loss (≦1.4dB), high return loss (≧35dB),compact design and more features.
Application: 1.Create high reflectance at the termination of a PON without disturbing traffic 2.Test reflectance from the central office 3.Check optical continuity of subscriber when being added or when troubleshooting
With the implementation of the fiber-to-the-home (FTTH) project, the coverage of the optical network is getting larger and larger, involving more and more users. Therefore, it is particularly important to detect and maintain the fault of the entire optical network quickly and accurately. Fiber optic reflector will be widely used in FTTx network, PON OTDR test, central office reflectivity test, communication system link detection and so on.
Hi all, I have a Catalyst 3650 running IOS XE 3.0.7. How to do a factory reset using CLI without wiping the flash? I have saved a number of config saves on it and want to preserve the flash intact. I have both physical and CLI access.Thanks,
Hello, We are using Cisco TelePresence SX80 for VTC and it's connected to Cisco Camera on rear and front.By the way, i can't find any function which disable the camera.i want to make it selectable so that i can decide whenever i want to show video or...
Hello, I must perform a migration from a 3com switch to catalys 9200 but the 3com has MSTP. The query is, can Rapid-PVST be compatible with MSTP? or MSTP with MSTP is recommended. 3com MSTP has the entire vlan in instance 0. [3COM-Distribution]displa...
these routers are direclty connected via point to point connection. When I try summarization, only ip route x.x.x.x x.x.x.x null0 with network statement works for me. When I use the aggregate address command I dont see summary route in route t...
Hi,I have an ASA2110 for multiple VPN customer's which are accessing different servers in our cloud environment.I will make this as simple as I can, my scenario is like this: 1 - On the ASA there is a DMZ sub-interface configured on 192.168.56.0/24 s...