cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1825
Views
0
Helpful
0
Replies

Routing about remote access VPN

Hello guys.

I installed remote access VPN on Windows 2019. I need to do additional configuration on the router to allow access outside.

 

I got this.

Public IP--------------ISP Router-------------Fa0/0 Cisco Router Fa0/1------------------------My Server client VPN access

82.25.35.129        192.168.0.1                  192.168.0.52                     172.16.1.1                               172.16.1.102

I got it:

Fa0/0

Ip dhcp address

Ip nat outside

Fa0/1

Ip nat inside

The routing tables is setup correctly

The access list 1 was:

Permit 192.168.0.0 0.0.0.0255

Permit 172.16.1.0 0.0.0.255

But for this exercise I change to permit any

I setup this and still does not work. : ip nat inside source static 192.168.1.1 1723 interface fa0/0 1723

What is the next step to allow GRE to pass from Wan to Lan toward the PPTP server……

Do I need to make something addisonal on the access list or....

Thank you in advance.

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: