cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1221
Views
5
Helpful
1
Replies

Upgrading the hub router in a DMVPN

CiscoMedMed
Level 1
Level 1

I have a pair of 3945 routers that are proving to be underpowered for the 100+ remote offices connecting to them. Fortunately I happen to have a couple of 4351 ISRs rated for significantly greater encrypted throughput. Is there any way I could upgrade the primary hub of the DMVPN without doing a new certificate request from each spoke? Any other considerations on upgrading the hub and

1 Reply 1

Hi,

You don't need to replace the spoke certificates, you just need to ensure the Hub has a certificate that is trusted by the spokes. Either generate a CSR and issue a new certificate to the new Hub from the same CA that is currently used or export the existing Hub's certificate and import to the new Hub.

 

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: