03-24-2020 06:31 PM
Hi,
Switch 1 and switch 2 connected via trunk. Both configured with new vlan 3.
When creating new vlan 3, is it need to include "Spanning-tree vlan 3 priority 8192"- Sw 1 and "Spanning-tree vlan 3 priority 16384"-Sw 2?
What will happen for those switch if didnt put in this command?
What situation need to apply this command?
03-25-2020 12:22 AM
First of all, are there only two switches in the topology? If so, are there only one physical link between switches?
If you have only one switches in the topology with one physical link between them
When creating new vlan 3, is it need to include "Spanning-tree vlan 3 priority 8192"- Sw 1 and "Spanning-tree vlan 3 priority 16384"-Sw 2?
no you don't need
What will happen for those switch if didnt put in this command?
nothing will happen
What situation need to apply this command?
only if you have switching topology with more than two switches and you need to be sure that a particular switch is the root
You can read for more understanding
03-25-2020 01:00 AM
May i know since this is vlan spanning tree will overwrite the switch spanning -tree configuration?
Is there any in layman term to simplify this vlan spanning tree concept and explanation?
03-25-2020 01:05 AM
Between the main core switches, there is a port-channel configured. Thereafter distribution switches and floor switches connected to these 2 core switches.
Is there any standard design implementing Spanning -tree parameters in switches?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: