we got two 3750x and needed to stack power. But one of 3750x is in shut down mode.
How to solved it ? please provide solutions and thanks.
Power stack name:Powerstack-1
Low port priority value:22
High port priority value:13
Switch priority value:4
port 1 status:Shut <<<<<<<<<<<<<<<
port 2 status:Shut<<<<<<<<<<<<<<<<
Neighbor on port 1: 0000.0000.0000 Neighbor on port 2: 0000.0000.0000
Power stack name: Powerstack-2 Stack mode: Redundant Stack topology: Standalone Switch 2: Power budget: 190 Low port priority value: 22 High port priority value: 13 Switch priority value: 4 Port 1 status: Not connected Port 2 status: Not connected Neighbor on port 1: 0000.0000.0000 Neighbor on port 2: 0000.0000.0000
What design is generally recommended for an office with approx 400 client devices. We have about 10 x access L2 switches (2960x) and are not sure whether to go with 1 x L3 stack (4 x 9300 switches) or maybe 2 x stacks (of 2 x 9300 switches). We are thinki...
After I create a VLAN i can no longer access the GUI.port 1 - trunk connected to routerport 2 - access, PCThe switch is connected to an Edgerouter.I'm sure it's something simple, but I'm new to VLANs and can't figure it out.
Hi Folks, I have posted my config below for a little advice/suggestions.This is 1 of 2 Cisco 887 routers which feed into a Cisco 2960 switch were I have mapped the access ports to VLANs as below. I have a few questions as I had planned to use Ether C...
Hello all. Some of my friends telling me that I am using stateless method for my Dhcp router and some of them telling me that I am using stateful method. I attached the packet tracer for references.This is the current configuration: A...
Hi Everyone, I want the centre administration & tutor computer to not be able to access the internet but can access web and file server. I have tried this coding but it doesn't work. access-list Filter1deny tcp host 2001:AAAA:BBBB...