Activating ip services on a 3560x switch

804

Views

Helpful

Comments

edited on: ‎03-01-2019 ‎04:51 PM

Hello
I have downloaded upgrade file to 3560x but upon reboot it will not start IP Services
've Attached show license status and show license file
how do I get it to boot ip services?

Regards Erik Dahl

Latest Contents

Command for showing deprecated commands?

Created by K-Grev on 04-22-2021 01:12 PM

Hi, Due to an unforeseen command loss after an upgrade, we are having to do some investigative research into our system.People in charge have told me to run the command "show run deprecated" to see the commands lost in the upgrade. I didn'... view more

Forwarding L2 Traffic through Bundle-Ethernet interfaces

Created by petehummon on 04-22-2021 12:14 PM

Hi Cisco folks,I’m a L3 guy who’s been asked to modify a couple of L2 devices. I need to connect some client hosts to two different switches, and I think I’m misunderstanding how my VLANs traverse the bundle-Ethernet topology.For the sake of simplicity, l... view more

ASR-920-12CZ USB MEM question

Created by jrudd071294210 on 04-22-2021 11:02 AM

Hello,I am working with ASR-920-12CZ's and am in the process of updating the IOS in dozens of 920's. Recently I have ran into a batch where the USB MEM port is not recognizing my memory stick and have to resort to updating the IOS over tftp. That wo... view more

route map and Policy based route

Created by TRACY HARTMANN on 04-22-2021 10:39 AM

I currently have a route-map in that goes through an access list and if you match the ACL the next-hop is something different then the gateway of last resort. If I want something to go the default route, I just deny the ip on the ACL. No... view more

Difference between 802.1X-2001 and 802.1X-2004

Created by 00ump2xvbAQnlB4eP5d6 on 04-22-2021 09:23 AM

Hello, What is the difference between 802.1X-2001 and 802.1X-2004 ? Kind Regards