Scenario: router installed on passenger ferry, interface FastEthernet0/1 used for radiolink to be used near harbours, a PC running a service that gets geographic position from the vessels GPS and that will set "admin status" on or off on th interface depending on how near/far away from the harbour the vessel is.
When the service sets the "admin status" to off this will not stay in this mode. The program reads the admin status after a while and detects it has turned "on" by itself and thus have to put it "off" again.
Why does it not stay "off"? Is this a "known feature", does anybody have any knowledge of this situation?
Hi, We are trying to configure TTAG on N9K-C93180-YC-EX running version 9.3.7 and it doesn't work.PTP is configured properly and the N9K get the time from the PTP server. With the configuration below, we can ping between the end points but we do...
Hi,We want to install some C9500-40X-A on our network, but we need many rspan sessions. In reference https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-10/configuration_guide/nmgmt/b_1610_nmgmt_9300_cg/configuring_spa...
Hello, I have two ExpressRoute connections to Azure. They are on the ASAs. (Please see network diagram). Firewalls are running as standalone - no failiover pair. Core switch is running OSPF with firewalls. Firewalls are peering with AZURE using BGP.&...
Hi,For shipment of C9200L-24T-4G-E, I require the MSDS of its battery(s) or need to know about the exact model of the batteries in order to investigate further myself. Is there any information available in this regard?Thanks in advance