Introducing an entirely new era of networking. The Network. Intuitive. Constantly learning, constantly adapting, constantly protecting. The Network Intuitive is the future state of networking, predicated on the insane demands of doing business today where companies need to get more out of their network.
Software-Defined Access (SD-Access)
Analytics and Assurance
Encrypted Traffic Analytics
Catalyst 9000 Series Switches
Centralized management for simple control of LAN, WLAN and WAN deployment by leveraging proven best-practices.
Read Chuck Robbins' blog The Need For More Intuitive Computing: ...Our new network is the result of the deep innovation we’ve been driving at Cisco, and it’s something I believe will change the trajectory of the entire industry...
* Registration for the Customer Connection Program is required and it's quick and easy. Once complete, make your way to the Enterprise Networks track and you'll find these briefings plus other program offerings.
Before the upgrade, I was able to SSH into a level 15 user and it would land me directly to # without using enable. After upgrading to from 16.3.8 to 16.9.4, my level 2 account can still SSH in but level 15 user account gets % login invalid. So I try...
What design is generally recommended for an office with approx 400 client devices. We have about 10 x access L2 switches (2960x) and are not sure whether to go with 1 x L3 stack (4 x 9300 switches) or maybe 2 x stacks (of 2 x 9300 switches). We are thinki...
After I create a VLAN i can no longer access the GUI.port 1 - trunk connected to routerport 2 - access, PCThe switch is connected to an Edgerouter.I'm sure it's something simple, but I'm new to VLANs and can't figure it out.
Hi Folks, I have posted my config below for a little advice/suggestions.This is 1 of 2 Cisco 887 routers which feed into a Cisco 2960 switch were I have mapped the access ports to VLANs as below. I have a few questions as I had planned to use Ether C...