Join us for the next Cisco TechAdvantage Webinar, a 2-hour technical discussion focusing on how to deploy Application Visibility and Control.
Cisco Application Visibility and Control (AVC) solution is a suite of services in Cisco network devices that provides application-level classification, monitoring, and traffic control to improve business-critical application performance, facilitate capacity management and planning, and reduce network operating costs.
The Cisco AVC solution is provided within the Cisco Integrated Services Routers Generation 2 (ISR G2) and the Cisco ASR 1000 Series Aggregation Service Routers (ASR 1000s). We will cover the technologies used in AVC and will provide tested use cases and deployment scenarios.
This session is for anyone who wants to understand and deploy Cisco Application Visibility and Control.
Hi We have two edge routers which are connected to ATT and Verizon separately. One of two routers is primary and second one is backup. so almost all of the time only one router work and another router is resting there. Do we have a way to bind the two rou...
Good Day, I am having issues with my ASA configuration and have thus far been unlucky in determining a solution. I have a bunch of hosts in a DMZ and a couple of client nets that they need access to. I need to route and allow traffic from hosts in th...
Hello All,We have an IR829GW router. I need to use it as a typical old school NAT router such that whatever devices are behind it use a NAT IP for the traffic that's going outbound ( For instance Internet access). I have looked in the config g...
I am new to virtual staking and am not sure what I am missing but any time I enter the command - Switch(config)#stackwise-virtualI get Invalid input detected at marker. Can someone tell me what I am missing?