cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Catalyst 6500 Switch with Supervisor 720 running Cisco IOS software displays the "SPANTREETYPE: getting tree type vlan for parameter 1 value 0" error message

1039
Views
0
Helpful
0
Comments

Core issue

Messages similar to these may appear in the logs:

Sep 10 13:09:10: SPANTREETYPE: getting tree type vlan for parameter 1 value 0

Sep 10 13:09:10: stp: begin nvgen vlan 70 config blocks

Sep 10 13:09:10: stp: nvgen state 0 config blocks

Sep 10 13:09:10: stp: nvgen protocol 0 config blocks

Sep 10 13:09:10: stp: nvgen priority 70 config blocks

Sep 10 13:09:10: stp: nvgen hello 0 config blocks

Sep 10 13:09:10: stp: nvgen fwddelay 0 config blocks

Sep 10 13:09:10: stp: nvgen maxage 0 config blocks

These messages are not errors messages. They are simple debug messages. These are not related to the operation of the protocol but rather to the IOS  infrastructure (SNMP queries, show commands and many other factors can lead this debug to print something on the console). These dubugs can also consume some resources.

Resolution

In order to stop these messages, use the no debug spanning-tree all command in order to disable the debugging output.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards