Viptela provides a compelling SD-WAN solution with advanced routing, segmentation and security capabilities for interconnecting complex enterprise networks. Its cloud-based network management, orchestration and overlay technologies make it easy to deploy and manage SD-WAN.
Click the following links to schedule this demo in a specific datacenter
Scenario 1: An overview of the SD-WAN vManage dashboard and discussion around Zero Touch Provisioning (ZTP) capability. Branch site routers, with design best practices, can easily be provisioned by leveraging automation through zero touch provisioning and centralized configuration. Centralized configuration utilizes the templates that can be pre-configured before device deployment.
Scenario 2: Use the Hybrid WAN connectivity over multiple WAN transport connections. Show connectivity could be established over any kind of transport, application steering over any transport. Use IP as transport to create flexible data plane topologies from full-mesh to Hub-n-Spoke to any arbitrary topologies. Deploy policy to create a strict Hub-n-Spoke topology for Corporate and IOT/PCI VPN segment. For GuestWiFi VPN in branches, only allow DIA.
Scenario 3: Demonstrate with centralized policy to create different connectivity model/topologies per VPN segment, that is,Corporate VPN – Full Mesh, IOT/PCI Segment – Hub-n-Spoke, and GuestWiFi – Only DIA and no site-to-site communication.
Scenario 4: Demonstrate business defined insertion of services (FW, IPS, IDS, etc) utilizing centralized policies. Cisco SD-WAN is a flexible architecture where services can be deployed in any of the site(s) irrespective of the physical topology. Simple policy activation can make selected applications and sites go through the required service.
Scenario 5: Show the simplicity of using application firewalling policies centrally. Various applications and/or flows would not be allowed between sites. Simple centralized policy activation would enforce such policies to any site on the overlay.
Scenario 6: Use the Application aware routing along with arbitrary topology networking to show the business policy driven view of application classification, connectivity and QoS provisioning. Discuss Application Performance settings while highlighting the ability of the network to dynamically switch paths to preserve a consistent application experience.
Scenario 7: Policy driven Data Center preferences for different branches. A subset of branches could prefer one Data Center over the other as a regional Internet exit.
Scenario 8 : CloudExpress provides performance based path selection when multiple exits are available. Enable CloudExpress for a given SaaS application on the Branches.
Scenario 9: vManage provides software management capabilities. Show the simplicity of software upgrade with Cisco SD-WAN.
Hi - basic question, but I am rusty...can one have two physical BGP peerings between two routers? I know one can LAG them up and use a loopback address, but what if one wanted to maintain two separate physical peering links?
Hello,The cisco 4510 chassis has 2 power supplies with 3 inputs each.my question is how much is the minimum and maximum current (amps) required for each input with 110V input?currently we plugged each input into 20 amp source which we believe is alot and ...
I have just started to setup the ISR 4331 following the Cisco white paper. After a lot more work than just this.ProcedureStep 1Connect the RJ-45 end of a serial cable to the RJ-45 console port on the router.Step 2After the device initial confi...
We’re looking for network operators and engineers to complete a 2-minute icon preference study.
The icon choice will help us better represent information on a Cisco software product.
Click here: https://ciscoux.az1.qualtrics.com/...