Viptela provides a compelling SD-WAN solution with advanced routing, segmentation and security capabilities for interconnecting complex enterprise networks. Its cloud-based network management, orchestration and overlay technologies make it easy to deploy and manage SD-WAN.
Click the following links to schedule this demo in a specific datacenter
Scenario 1: An overview of the SD-WAN vManage dashboard and discussion around Zero Touch Provisioning (ZTP) capability. Branch site routers, with design best practices, can easily be provisioned by leveraging automation through zero touch provisioning and centralized configuration. Centralized configuration utilizes the templates that can be pre-configured before device deployment.
Scenario 2: Use the Hybrid WAN connectivity over multiple WAN transport connections. Show connectivity could be established over any kind of transport, application steering over any transport. Use IP as transport to create flexible data plane topologies from full-mesh to Hub-n-Spoke to any arbitrary topologies. Deploy policy to create a strict Hub-n-Spoke topology for Corporate and IOT/PCI VPN segment. For GuestWiFi VPN in branches, only allow DIA.
Scenario 3: Demonstrate with centralized policy to create different connectivity model/topologies per VPN segment, that is,Corporate VPN – Full Mesh, IOT/PCI Segment – Hub-n-Spoke, and GuestWiFi – Only DIA and no site-to-site communication.
Scenario 4: Demonstrate business defined insertion of services (FW, IPS, IDS, etc) utilizing centralized policies. Cisco SD-WAN is a flexible architecture where services can be deployed in any of the site(s) irrespective of the physical topology. Simple policy activation can make selected applications and sites go through the required service.
Scenario 5: Show the simplicity of using application firewalling policies centrally. Various applications and/or flows would not be allowed between sites. Simple centralized policy activation would enforce such policies to any site on the overlay.
Scenario 6: Use the Application aware routing along with arbitrary topology networking to show the business policy driven view of application classification, connectivity and QoS provisioning. Discuss Application Performance settings while highlighting the ability of the network to dynamically switch paths to preserve a consistent application experience.
Scenario 7: Policy driven Data Center preferences for different branches. A subset of branches could prefer one Data Center over the other as a regional Internet exit.
Scenario 8 : CloudExpress provides performance based path selection when multiple exits are available. Enable CloudExpress for a given SaaS application on the Branches.
Scenario 9: vManage provides software management capabilities. Show the simplicity of software upgrade with Cisco SD-WAN.
Dear guysMy company is using 2 4507 switch (running VSS, 1 active, 1 stanby)Each switch has a control card: WS-X45-SUP7-EWS-X45-SUP7-ECORE-C4507-VSS#sh processes cpuCore 0: CPU utilization for five seconds: 21%; one minute: 19%; five minutes: 18%Core 1: C...
Can anyone please give me the power consumption of any C9500 and C9300 switches.I know there are lots of models but I'm looking for a rough idle figure.The Max power spec isn't realistic for this purpose.
Hello, I have a network were all traffic should pass through a firewall (in a server) that implements some routing and filtering rules. As we can see in this picture, the server is connected to switch 3 (a layer 3 switch). To direct the traffic to th...
I have a little problem of all Routers from area 22 (Except ABR),when it try to ping something out of its area, it gets into a loop between R5 & R6 & SW5, I guess its something about the cost of them but ill be glad for people to explain what is t...
I have two Cisco C6832-X-LE connected by switch mode virtual. Both switches are currently running 6848x-ipservicesk9-mz.SPA.152-2.SY1.bin and I would like to upgrade them to c6848x-ipservicesk9-mz.SPA.155-1.SY7.bin. What I am look for is th...