3.Click on the icon to the left of the Cisco TAPI 32-bit Client. Take into consideration that Cisco TAPI 64-bit Client is supported from Callmanager release 8.5.1
4. Open the TSP file you downloaded from CM in your windows server (run the installation using the Administrator account) and follow the on screen instructions to complete the install. Ensure that multiple instances of the tsp are Not selected:
Make sure that Cisco CTIManager and Cisco AXL Web Service services are running on the callmanager servers that you are going to set in the next configuration prompt. Also make sure that the application user has the this role "Standard AXL API Access" assigned.
TSP will install.
9. Go to Start > All Programs > Cisco TSP > Cisco TSP Configuration > Configure > Choose Advance Tab > Change “Provider Open Completed Timeout” to 300”)
11. Make sure all "Gateway, Service and Park devices" (CTI ports) show registered with Callmanager. Go to Callmanager Administration page > Device > Phone.
12.Make sure that all "Queues" (CTI route point) show registered with Callmanager. Go to Callmanager Administration page > Device > CTI Route Point.
Hello Forum,my company will update there old Procurve Layer-2 switches with new Cisco CBS250 or CBS350.We also need new Transceiver with multimode fibre. When I look at the compatibility matrix I think that the GLC-SX-MMD would work fine and original Cisc...
hi all in the diagram below - 16.0/24 is a static route redistributed into ospfall interfaces are equal cost with ospf turn on1) when switch1 receive external ospf 16.0/24 advertisement on ge-0/0/1 from switch 2 - does it fwd the external advertiseme...
Hello all! First time poster and newbie to networking here. As a personal project and achievement I am hoping to get this 897 series router setup as my home network router as an upgrade from my stock rubbish iinet one.I am led to believe it is possib...
hi all I wanted 113.0/24 to be learn by L3 switch1 and R1I do not want 113.0/24 to be learn by L3 switch1 via ge0/0/2 1) Is there anyway that i can do it ? can i do a inbound route filter on ge-0/0/2 only ? 2) should i have 2 x ospf p...