The Test Plan UCOP_CiscoDNACenterProjectPlanning_ATX_SF_TestPlan
The AS Built UCOP_CiscoDNACenterProjectPlanning_ATX_SF_ASBuilt
The PreDeployment Questionaire. UCOP_CiscoDNACenterProjectPlanning_ATX_SF_PreDeploymentQuestionaire
Please keep in mind that these are examples of how each document can look, they should not be taken as a complete document in any scenario and you will need to add to each of them in order to make them practical for your Cisco DNA Center Project.
\Hi Team, Is there a method to add an additional 10G link to an in-production 10 gig link to form a port channel. Nexus 3K switch is having BGP with one of the router over L3 port. We are advertising and receiving the routes via with EBGP.N...
I facing problem CPU load high in my 2960 switch. when check CPU load detail of my switch, found DAI process consume the most. I did restarted my switch but still same. when I do Wireshark packet capture, found a lot of ARP request to broadcast IP. Any pe...
Howdy, I've got a problem in my simulation, for some reason I can't seem to get the DHCP packet to make it over to the DHCP server. It makes it to the sever access switch, then drops. I have the DHCP server set up with a static IP in my Servers ...
we are designing a new solution where a C9500-24Y will be deployed and we need to put GLC-SX-MMD and GLC-TE on it,so is it compatible?do we need an extra config for it or does the switch auto-sense the plugged GBIC and forwards traffic properly?