In this sample Article from Digital Network Architect Center Solutions - PartII:
You will learn about the many different things of Digital Network Architect Center (DNAC), about the Design module, and about the Provisioning Module, and about assurance is positioned to know exactly who and what is on the network at any given time, as well as assign different Network devices with Digital Network Architect Center, it is the perfect solution for centralized deployment and policy management
Cisco DNA Center is a Cisco system for centralized deployment and policy management and control of devices within your network.
Today we will learn how to add a new site to Digital Network Architect Center within the building details and floor!
Step.1- Access to the DNAC, Navigate to the Design module Click + and choose add area, from here you will enter area with continent.
Step.2- Click Add site and choose second option which is [Add building], here you will enter building details include [Building Name, Address, Latitude, longitude].
Step.3- Add the Floors of the building Click Add site --> choose add floor from the list now you can add details include [Floor Name, Site name, building name, Image for the floor Etc.
Great, right now you have successfully added your site as details on Cisco DNA center.
Now we will Navigate to the network Profiles from here will create new profile for wireless, Step.1 Design --> Network Profile -->Add profile --> Wireless
Step.2- Add SSID for the wireless profile and assign the profile to the site
- Here we will click to assign the network profile to our site.
NOTE: If you created the Site include building and floor the DNA will count all of them as sites for example if you create [Site ABC--> Building B1 --> Floor 1] so once assign the network profile to the site will count the site as 3xsites.
Now will start with the Provision Module:
Steps –[ Navigate to Provision --> unassigned devices --> choose WLC -->Actions --> Provision --> Assign device to the sites-->Choose the site --> Save --> Assign]
NOTE: Assign the devices to the building or floor which we create under the site, Not direct to the site because will not accept to assign if you choose the main site.
Please Find the attachment to see the DNA steps as GUI.
Stay tuned for Part III about Cisco Network Automation, I hope that has been informative for you and thank you.
Hi Team, my C3750 Switch restarted Twice today and i am not sure what caused the issue. i checked my Power Supply but did not find any issue. can somebody help me to figure it out the Root cause of the issue. show versionCisco IOS Software, C375...
hello, im looking to use a single 867's dialer interface to hopefully accomplish outbound PAT for internet access but also with some inbound port forwarding. ive tried the idea of a route map to only allow the external addresses i want for the port f...
Dear All,I am facing an issue since last 15 days. We are using Cisco 3845 with 2 ISP. One for data another for VOIP.We have 2 VOIP servers on cloud. We are doing Policy Based routing that any traffic destined for VOIP servers will go via 1st ISP and all o...
I have a C6816-X-LE running the latest IOS 15.5(1)SY4. Here is my PBR configinterface te1/1
ip policy route-map PROV_USSATS
ip access-list extended PROV_USSATS
deny ip any 172.16.0.0 0.0.255.255
deny ip any 172.19.0.0 0.0.255.255