EEM script to capture packets at SPP every 15 mins and other logs every minute.
Following o/ps are captured every minute:
show drops all location all
sh controllers np counters all location 0/0/cpu0
sh controllers np counters all location 0/1/cpu0
sh controllers fabric crossbar statistics instance 0 location 0/rp0/CPU0
sh controllers fabric crossbar statistics instance 0 location 0/0/CPU0
sh controllers fabric crossbar statistics instance 0 location 0/1/CPU0
show spp node-counters loc 0/rp0/CPU0
show spp interface loc 0/rp0/CPU0
show controllers fabric fia instance 0 stats loc 0/rp0/CPU0
show controllers fabric fia instance 0 stats loc 0/0/CPU0
show controllers fabric fia instance 0 stats loc 0/1/CPU0
SPP capture is done every 15 mins. Every 15 mins SPP captures are written to another file in Harddisk. This is done to make sure that SPP capture is never interrupted(Except for the time when SPP captures are copied to harddisk).
The filters are set to match LDP discovery going out for specific source and destination address.
Hi Team ,I have gone through the tunneling concepts of IPV6 to IPV4 interoperability.How does this Manual tunnel ,6to4 tunnel and ISTAP tunnels are different from NAT64/DNS64 concept.I understand that NAT64/DNS64 will serve IPV6 only clients to communicat...
Hi I have a the follow topology one router with VRF 1:1 advertising to me a networks from RIP and for other VRF 1:3 with OSPF. and import/export network without problem but I need know a network for RIP then redistrubute just a single host in to...
We have a couple fpr-2140's that came with rails but we're looking to mount in a 2 post rack. Is this possible with the hardware that was included with the purchase or do we need to buy the rack kit? Seems crazy that the 2120's come with the the kit we ne...