Embedded Event Manager (EEM) is a powerful tool integrated with Cisco IOS Software for system management from within the device itself. EEM offers the ability to monitor events and take informational, corrective, or any desired action when the monitored events occur or when a threshold is reached.
This document helps in getting output of various troubleshooting commands when EIGRP neighbour flaps through EEM script.
Knowledge of EIGRP and working of EEM script.
Step 1:telnet the router.
IMPORTANT: console access is not reliable and will miss characters when copy/pasting, telnet/ssh using TCP will take care that all characters are received.
Hi Folks, I have posted my config below for a little advice/suggestions.This is 1 of 2 Cisco 887 routers which feed into a Cisco 2960 switch were I have mapped the access ports to VLANs as below. I have a few questions as I had planned to use Ether C...
Hello all. Some of my friends telling me that I am using stateless method for my Dhcp router and some of them telling me that I am using stateful method. I attached the packet tracer for references.This is the current configuration: A...
Hi Everyone, I want the centre administration & tutor computer to not be able to access the internet but can access web and file server. I have tried this coding but it doesn't work. access-list Filter1deny tcp host 2001:AAAA:BBBB...
Hello - I need help with this error on my router. I haven't try to reboot it yet but I'm just wondering what might have caused this error. From the Internet forum, it seems like a hardware issue. What can I do to determine the root cause? Do I have a...
Hello, I have one problem with Cisco prime. I am not getting recent change information from the tab. I have done everything but for no purpose. The picture is attached. Please guide me so that I can check my recent changes in cisco 2960. Cisco ...