The router is having an issue where we are unable to login to the router using console or mgmt ports. Other components of router is working fine. RSP reload is the only way we can get access to the router.
Since the access to router is disabled we cannot login to the router in order to collect the logs to debug this issue further.
We can use EEM script inorder to collect the logs and save it into a file in harddisk. This EEM script will run every 30 mins and dump the logs into the file. The cron entry can be changed incase we want to run it once every day or some other period.
Logs that the script collects:
show proc devc-vty show proc devc-conaux show log sh processes cpu Show users Show line
event manager environment _cron_entry 30,0 * * * 0-6 <<<<< runs script every 30 mins
event manager directory user policy harddisk:/scripts/
Hello, are there any aditional features within the XL and XL-Y in comparision of the normal SUP-1. I DON´T talk about the physical ports, bandwight, switching capacity, IPv4/v6 routes and stuff like that. for example LISP and SGT support is given at ...
Hello TogetherI need to upgrade an ISR4400 router to Fuji 16.9.3 software version.What do I do?With the switches (3650) the command was:"request platform software packages install..."So far I have only seen the possibility to change the bootvar:"boot syst...
Hello Community, I am using an IR809 router. I could establish GE0 connection successfully. But GE2 I intended for accessing IOx manager is not working out. It should give me the manager at port 8443 of my GE2 IOx host IP 192.168.1.3, but it is not.i...
Hello, I have for example a LAN with several switches (SW1-4) connected together with Etherchannel, an ESX is connected to the SW1 with Etherchannel too, and an other server connected to SW4. ESX====SW1====SW2====SW3====SW4====SRV &nb...