This document explains the solution for the error message %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error,
Interface <interface> Power Controller reports power Imax error detected.
Power Imax / Tstart errors may be reported with some third party PDs.
%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error,Interface <interface>
Power Controller reports power Imax error detected.
Sep 21 22:25:13.675 GMT:%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error,
Interface Fa0/15: Power Controller reports power Imax error detected
You are hitting the bug CSCsw18530 : Power Imax / Tstart errors may be reported with some third party PDs
This error indicates that PD is drawing over-current more than allowed/supported per IEEE 802.3af standard. Seen with some of the 3750,3750G,3750-E,3560-E, 3750-X, 3560-X, 3560-C, 2960S, 2960,2960C switches.
This issue is fixed in 12,2(55)SE3 , 12.2(58)SE1 and later releases. The following interface configuration commands have to be applied
to resolve the issue,
Switch(config)# int x/y
Switch(config-if)# power inline port 2x-mode
Switch(config-if)# no shut
The fix is present in the following platforms only : 3750-E,3560-E, 3750-X, 3560-X, 3560-C, 2960S, 2960,2960C.The other platforms
do not support 2X power mode and the workaround would be to use a longer cable.Possible workaround is using Longer cable (>50ft)
Hello Everyone, I have installed Embedded Wireless on catalyst 9300 switch, now I am trying to register the Access point (Model numbers : 3702 and 1852i) but I am unable to do the same as it is registering for a minute and trying to download the EWLC...
Hi, We've just recieved a batch of 9200L and i'm going through the configuration. The configuration is setup and working well, I was just wondering if someone could assist with the user accounts part of the product. One our old swiches, we used to ru...
Hi Experts, i have switch with Model number is N9K-C9372TX-E & NXOS: version 7.0(3)I5(2). May i know the Command to implement the ethernet port speed limit to 25 Mbps on ingress to port or Egress out in the switch? thanks.
Hello. I thought with the things I have learned at this point, that I could simply figure out how to connect my 1841 to my ISP router and from there, be able to plug a host in to the one free fast ethernet port on my router and reach the web. But this has...